Sharp BD-HP20U Operation Manual page 41

SETTINGS
• When the sound volume of each speaker is uneven, reset
the settings separately.
As for a subwoofer, you can adjust LEVEL only.
9 Press ENTER while the TEST sound is present
from the speaker that you want to reset the
setting.
10 Press 41/1_ to select the "LEVEL", then press
A/V to preferred setting, then press ENTER.
1 1 Repeat steps 9 and 10 until each speaker is
reset.
12 Press A/V/4/I_ to select "FINISH", then press
ENTER.
13
Press SETUP or EXIT to exit.
O_
m=
(_ - 39