Download  Print this page

Sharp BD-HP20H Quick Start Manual

Hide thumbs
   

Advertisement

Quick Start Guide for BD-HP20H
Accessories
Remote control
Two "AAA" size
unit
How to install the batteries
Press down on
the tab in the
direction of the
arrow to remove
the battery cover.
Connection
When connecting this player to a TV,
Sharp recommend using a HDMI cable
or AV cable (Supplied).
Note:
For HDMI output settings, refer to page 15 of the operation manual.
When connecting with a component video cable, refer to page 16 of the operation manual.
Turn on the player and TV
After you have connected the AC cord to the unit, connect the AC cord
to the mains. Turn on you TV and switch to the appropriate AV input
(Refer to your TV's operation manual). (This may be labeled HDMI/EXT/
AUX etc.)
AC cord
batteries
Load the two R-
03 size batteries
("AAA" size,
UM/SUM-4)
supplied with the
remote control
unit. Make sure
that the battery
poles k and l
are positioned as
indicated.
AV cable
Slide the battery
cover in the
direction of the
arrow until it
clicks.
To AC IN
terminal
To AC outlet
HDMI cable
(commercially available)
AV cable(supplied)
B (POWER)
Operation
Quick start
Manual
guide
TV

Advertisement

Table of Contents
loading

  Also See for Sharp BD-HP20H

  Summary of Contents for Sharp BD-HP20H

  • Page 1 To AC IN terminal To AC outlet When connecting this player to a TV, HDMI cable Sharp recommend using a HDMI cable (commercially available) or AV cable (Supplied). AV cable(supplied) Note: For HDMI output settings, refer to page 15 of the operation manual.
  • Page 2: Setup Menu

    Setup menu The SETUP MENU consists of several menus where you can make various settings concerning language, audio functions, images, etc. The following setting is basic process. There are procedures over the key-guide of each menu indicated below. Preparation: • Turn on you TV and switch to the appropriate AV input (Refer to your TV’s operation manual). •...