Conversion Recording - Samsung SV-5000W Owner's Instructions Manual

Conversion Recording I
You can convert the signal recorded on a tape to another format on
a second tape.
1 Connect the RCA Audio/Video cable to the input on the front of the
Samsung VCR (SV-5000W)
2 Insert the tape to record.
3 Connect the other end of the RCA Audio/Video cable to the output
connectors of another VCR (see page 39).
4 If you wish to convert from a tape recorded on NTSC to a PAL
recorded tape, insert the NTSC tape into the other VCR.
5 Press the INPUT button on the remote control to select the L1
input,
Result: The display panel shows L1.
6 Press the PAL output system button on the front panel to select
the PAL system.
Result: The display panel shows PAL.
7 Press the PLAY button of the other VCR.
8 Pressthe REC button of the SamsungVCR at least one second.
Result: Q appearson the display panel,and recordingbegins.
_" Follow these steps to perform conversion recording to other
formats.