Audio Dubbing A Pre-Recorded Cassette - Samsung SV-5000W Owner's Instructions Manual

Audio Dubbing a Pre-recorded Cassette
-iF _-
INPUT
--kCi
[_
_ LV_
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
4. a CD player;
4* a microphone connected to a sound system ; or
4* a cassette player.
Note:
Audio dubbing is applicable only to the linear audio track,
1 Connect an RCA audio cable to the appropriate output on your
sound system (CD/eassette player for example).
2 Connect the other end of the RCA audio cable to the audio input
connectors (L+R) on the front of your VCR.
3 Insert the pre-recorded video cassette on which the audio track is
to be replaced.
4 Select the LINE 1 input by pressing INPUT until L I is displayed.
5 Locate the point on the cassette at which you wish to start dubbing.
6 Press P/STILL (11).
7 Press A.DUB.
Result: Your VCR is new in the Audio Dubbing Pause mode.
8 On the sound system, locate the point on the CD or cassette at
which you wish to start playback.
_: The track that you wish to record on the cassette.
9 Press the pause button on your sound system.
10 When you are ready:
<, start playback on the sound system ; and
<, press REC or P/STILL (11) on the remote control.
Result: The soundtrack is replaced on the pre-recorded video
cassette.
11 When you have finished recording, press STOP (•).