Connecting Cable Tv - Samsung HP-T4254 Owner's Instructions Manual

Hide thumbs Also See for HP-T4254:
Table of Contents

Advertisement

Available languages

Available languages

Connecting Cable TV
To connect to a cable TV system,
follow the instructions
below.
Cable without
a Cable Box
1
Plug the incoming cable into the ANT 2 IN(CABLE)
terminal on the back of the TV.
_-- Because this TV is cable-ready,
you do not need a cable box to view
unscrambled
cable channels.
to a Cable Box that Descrambles
All Channels
1
Find the cable that is connected to the ANT OUT terminal on your cable box.
_-- This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2
Connect the other end of this cable to the ANT 2 IN(CABLE)
terminal on the back of
the TV.
to a Cable Box that Descrambles
Some Channels
If your
cable box descrambles
only some channels
(such as premium
channels),
follow
the instructions
below.
You will need a two-way
splitter,
an RF (A/B) switch,
and four lengths of Antenna
cable. (These items are available
at most electronics
stores.)
1
Find and disconnect the cable that is
connected to the ANT IN terminat on your
cable box.
This terminal might be tabeled 'ANT IN_',
'VHF IN" or simply, "IN".
2
Connect this cable to a two-way splitter.
Connect an Antenna cable between an
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
Connect an Antenna cable between the
ANT OUT terminal on the cable box and the
B-IN terminal on the RF(A/B) switch.
Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
Connect the last Antenna cable between
the OUT terminal on the RF (A/B) switch
and the ANT 2 IN (CABLE) terminal on the
rear of the TV.
Incoming
cable
Splitter
Incoming
cabte
Splitter
_
/
Cabte
BOX
Incoming
cable
Splitter
RF
(A/B)
Cable
BOX
Switch
sp,tter
L
J
RFIA_8)
Cable
Box
Switch
Switch
J
After you have made this connection,
set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B"
position to view scrambled
channels. (When you set the A/B switch to "B", you wilt need to tune your TV to the cable box's
output channel, which is usually channet 3 or 4.)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp-t5054

Table of Contents