Setting Up The Tv With Your Pc - Samsung HP-T4254 Owner's Instructions Manual

Setting up the TV with your PC
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
Now to Auto Adjust
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
Press the A or _' button to select PC, then press the ENTER button.
Press the A or T button to select Auto Adjustment, then press the ENTER
button. The message Auto Adjustment in progress. Please wait. appears on
the screen and the picture adjustments are automatically activated.
Press the EXiT button to exit.
_,_ This function does not work in DVI-Digitai mode.
_-- Change to the PC mode first.
Adustina the Screen Qualit
The purpose of the picture quality adjustment is to remove or reduce picture
noise. If the noise is not removed by fine tuning alone, then do the frequency
adjustments to the utmost and fine tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the center of the screen.
_-- Change to the PC mode first.
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
Press the A or _' button to select PC, then press the ENTER button.
2 Press the ENTER button to select image Lock.
Pressthe A or T buttonto select Coarse or Fine, then pressthe ENTER
bu_on.
Pressthe 4 or _ buttonto adjustthe screen quality, then pressthe ENTER
bu_on.
Press the EXIT button to exit.
_-- This feature may change the width of the image. If necessary, adjust the
position to center.
Continued...