Connecting Cable Tv And Vcr; Cable Without A Cable Box; Cable With A Cable Box That Descrambles All Channels; Connecting A Cable Converter Box - Samsung HLP4663W Instruction Manual

Connections

Connecting Cable TV and VCR

You can connect different cable systems to your TV, including cable without a cable box, and
cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

If you want to connect cable, and you do not need to use a cable box:
Plug the incoming cable
1
into the "ANT 1 IN"
terminal on the rear panel.

Cable with a Cable Box that Descrambles All Channels

Find the cable that is
1
connected to the
ANTENNA OUT terminal
on your cable box. This
terminal might be labeled
"ANT OUT", "VHF OUT"
or simply, "OUT".
Connect the other end of
2
this cable to the "ANT 1
IN" terminal on the rear
panel.
18

Connecting a Cable Converter Box

This connection allows you to watch cable and premium channels. You should keep your TV
selected to "ANT 1 IN" so that you can use the TV features. When viewing premium channels,
select "ANT 2 IN" and tune the TV to channel 3 or 4 (whichever channel is vacant in your area),
then use the converter box to change channels. You will need two coaxial cables.
From
Cable

Connecting a Cable Converter Box and a VCR

This connection allows you to watch and record basic and premium cable channels, as well as
watch videotapes. You should keep your TV selected to
features. When viewing premium channels or recording with the VCR, select
(whichever channel is vacant in your area), then use the converter box to change channels.
TV Rear Panel
From
Cable
Stereo VCR
Note: When you use a converter box with
your TV, there may be features that you can
not program using the remote control, such
as programming your favorite channels and
blocking channels.
"ANT 1 IN" so that you can use the TV's
"ANT 2 IN"
Caution: If you want to record one channel
while watching another channel, a splitter
(not included) must be added between the
cable and "ANT 1 IN". One output of the
splitter goes to "ANT 1 OUT" and the
second output is connected to IN on the
cable converter box.
If you have a mono VCR, connect L/Mono
to VCR Audio OUT using only one audio
cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the
S-video cable to video1 simultaneously.
When you use a converter box with your
TV there may be features that you can not
program using the remote control, such as
programming your favorite channels and
blocking channels.
19