Selecting The Antenna; Adding And Erasing Channels - Samsung HP-T4254 Owner's Instructions Manual

i Channel Control ]
Selecting the Antenna
1 Press the MENU button to display the menu.
Press the A or _' button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the A or _' button to select Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Press the ANTENNA button on the remote control to select Air or Cable.
_-. If the antenna B connectedtoANT1 IN AtR), _ _ _ i_
select Air and if it is connected to ANT2 IN_CABLE_. _ ' '_ i'_" _°'
select Cable. ,,
> f both ANTI IN(AIR) and ANT2 IN(CABLE) are
connected, select the antenna input you want. If the '_:'_'_ "_'_:'_'
antenna input is not selected properly noise may '_
appear on the screen. _
,-----,----__---__--__-----,,-----,
i II A_NA G_T WlS_,I_K RE_
U i
..... U2-r IIi
Adding and Erasing Channels
You can add or delete a channel to display the channels you want. To use the Channel List function, first run Auto
Program (see page 19).
1 Press the MENU button to display the menu.
Press the A or _' button to select Channel, then press the ENTER button.
2 Press the A or _' button to select Channel List, then press the ENTER button.
3 Press the A or _' button to select Added, then press the ENTER button.
Pressthe A/T/4/_ buttonsto selecta channetto add, then pressthe ENTER
bu_on.
Pressthe A or T button to select Add, then pressthe ENTER button to add the
channel.
Press the MENU button to return.
_-- All added channels wilt be shown on Added menu.
Continued...