Using Your Tv As A Computer (Pc) Display; Display Modes - Samsung HP-T4254 Owner's Instructions Manual

PC Display
Using Your TV as a Computer (PC) Display
Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be
different, depending upon your particular version of Windows and your particular video card. However, even if your actual
screens took different, the same basic set-up information will apply in almost alt cases. (If not, contact your computer or
Video Card manufacturer.)
1 First, click on Control Panel on the Windows start menu.
2 When the control panel window appears, click on Appearance and Themes
and a display dialog-box will appear.
3 When the control panel window appears, click on Display and a display dialog-
box will appear.
4 Navigate to the Settings tab on the display dialog-box.
The correct size setting (resolution)
Optimum: 1024 x 768 pixets
If a vertical-frequency option exists on your display settings dialog box, the
correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal
from the system doesn't equal the standard signal mode, adjust the mode by referring to your videocard user
guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized
during manufacture.
Resolution Vertical
720x400 70.067
59.940
VGA
640x460 72.809
751000
60.317
SVGA 800x600 72.188
75.000
60.004
XGA 1024x768 70.069
75.029
WXGA 1360x768 60.015
Horizontal Frequency (kHz)
31469
31469
37861
37500
37879
48077
46875
48363
56476
60023
47712
Vertical Polarity
N
N
N
N
P
P
P
N
N
P
P
Horizontal Polarity
P
N
N
N
P
P
P
N
N
P
P
HP-T4254
v'
v'
v'
v'
v'
HP-T5054
v"
v"
v"
v"
v"
v"
HDIVlI/DVI Input
Resolution Vertical Fre_e cVy(Hzi
720x400 70.087
VGA
640x480 59.940
SVGA 800x600 60.317
XGA 1024x768 60.004
WXGA 1360x768 60.015
Horizontal Frequency (kHz)
31469
31469
37879
48363
47712
Vertical Polarity
N
N
P
N
P
Horizontal Polarity
P
N
P
N
P
HP-T4254 HP-T5054
v" v"
v" v"
v"
. The interlace mode is not supported.
, The TV operates abnormally if a non-standard video format is selected.
, The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
. "_" mark means that this mode can be supported.
• For the HP-T4254, PC text quality is optimum in XGA mode (1024 x 768@60Hz).
• For the HP-T5054, PC text quality is optimum in WXGA mode (1360 x 768@60Hz).
(Three pixels on left, right, top and bottom will be grayed out at the resolution setting of 1360x768@60Hz. This is not a mechanical problem
but a result caused by the pixel difference between the standard resolution and the PDP panel.)
• When this TV is used as a PC display, 32-bit color is supported.
• Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.)
Check your PC instruction book for information about connecting your PC to a TV.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected).
If so, press the SOURCE button on the remote control or TV panel to enter a VIDEO mode. Also, make sure that the PC is connected.