Recording - Samsung 4 Series User Manual

Anynet + Menu
❑
The Anynet + menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet + Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
TV Remote Control Buttons Available in Anynet+ Mode
❑
Device Type Operating Status
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
Anynet + Device
After switching to the device, while playing a file
Device with built- After switching to the device, when you are watching a TV
in Tuner programme
Audio Device When Receiver is activated
The Anynet+ function only works when the active source on the TV remote control is set to TV.
N
The button works only while in the recordable state.
N
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
N
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
N
The Anynet+ functions do not operate with other manufacturers' products.
N
In Anynet+ mode, the colour buttons may not work properly.
N
The , operations may differ depending on the device.
N

Recording

You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER E button to select Anynet+ (HDMI-CEC).
. Press the ▲ or ▼ button to select Record, then press the ENTER E button. Recording begins.
When there is more than one recording device
N
When multiple recording devices are connected, the recording devices are listed. Press the ▲ or ▼
button to select a recording device and press the ENTER E button. Recording begins.
When the recording device is not displayed
N
Select Select Device and press the red button to search devices.
You can record the source streams by selecting Record.
N
Pressing the button will record whatever you are currently watching. If you are watching video from
N
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to
N
a recording device, refer to the recording device's users manual.
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder's title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder
appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
English - 
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER E buttons
Colour buttons / EXIT button
(Backward search) /
(Stop) / (Play) / (Pause)
P / button
/ button
=
M MUTE button
TV
(Forward search) /
P 1
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Move
Enter
Return