Antenna; Cable Box; All Channels - RCA VR502 Owner's Manual

Cable System With Cable Box to Unscramble All Channels
A. 10
Basic hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Set the 3 CH. 4 switch on back of VCR to
either channel 3 or 4.
You will tune the TV to this channel and use the
TV/VCR button to watch the VCR.
2.
3,
Connect as shown.
This connection may require additional
accessories not provided.
Plug in power cords of VCR, TV, and
cable box.
4. Turn to page 7 for "Setting Up the VCR."
From Cable
Cable Box RF Coaxial
- Cable
RF Coaxial Cable
(supphed)
N FROM
ANT.
VHF/UHF
OUT TO TV
Back of VCR
VIDEO1 AUDIO1
@ @OUT @ oe@
75 to 75/300 Ohm
. _ Separator
OR VHF
Cable/
_ _'1_
Antenna UHF
Back of TV
all
4
Advanced hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation - use of TVA/CR button not
required.
1°
2.
Connect as shown.
This connection requires additional accessories
not provided.
Plug in power cords of VCR, TV, and
cable box.
3. Turn to page 7 for "Setting Up the VCR."
You will tune the TV to its video input to watch
the VCR.
Cable Box
From Cable
RF Coaxial '_
Cable _
Signal _ RF Coaxial
Splitter _ @ .... ANT.OM
VHF!UHF
RF Coaxial Cable
(supplied)
Back of VCR
VIDEO1 AUDIO1
)?
'@.@%,,0,E,
M01_0 _
ANTENNA
Back of TV