Table of Contents
Advertisement
Hooking Up the VCR
Antenna or Cable System Without a Cable Box
A. Basic hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Set the 3 CH. 4 switch on back of VCR to
either channel 3 or 4.
Tune the TV to this channel and use the
TV•VCR button to watch the VCR.
2. Connect as shown.
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR and TV.
4.
Continue to page 10.
B. Advanced hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation — use of the TV•VCR button is
not required.
1. Connect as shown.
This connection requires additional accessories
not provided.
If your TV/monitor has an S-VIDEO connector,
also connect the supplied S-VHS cable to take
advantage of S-VHS.
If your TV is not stereo, you may need a
Y-adapter to hear sound from both channels.
2. Plug in power cords of VCR and TV.
Continue to page 10.
3.
Tune the TV to its video input to watch the
VCR. Set the AUTO TV/VCR feature to OFF.
See page 12 for details.
A
From Antenna
300/75 Ohm
or Cable
Adapter
OR
RF Coaxial Cable
(supplied)
B
From Antenna
or Cable
OR
RF Coaxial Cable
(supplied)
Back of VCR
IN FROM
AUDIO1
ANT.
VHF/UHF
OUT
R
L
OUT TO TV
3 CH. 4
IN
OR
Cable/
Antenna
Back of TV
300/75 Ohm
Adapter
IN FROM
AUDIO1
ANT.
OUT
VHF/UHF
R
OUT TO TV
3 CH. 4
IN
Audio/Video Cables
VIDEO
INPUT
RIGHT
OUT
AUDIO
IN
L /
MONO
Back of TV
VIDEO1
OUT
IN
S-VIDEO
75 to 75/300 Ohm
Separator
VHF
UHF
Back of VCR
VIDEO1
OUT
L
S-VIDEO
S-VHS
Cable
S-VIDEO
CABLE /
ANTENNA
3
Advertisement
Table of Contents
