RCA VR568 User Manual page 33

USING TWO VCRS FOR COPYING AND
EDITING TAPES
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram below.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input).
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4--the one selected on the
playback VCR.
If you are using audio/video cables, select L1 to record from
the jacks on the back of the VCR or L2 to record from the
-jacks on the front of the recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert a
blank tape with its safety tab in place into recording VCR.
6. Use visual search to locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6-9 to copy or edit additional segments.
Two VCR Connection
%
R TENNA
PLAYBACK VCR
ANT IN
VIDEO AUDIO
RECORDING VCR
TO TV
:)
TO TV
i
31