Table of Contents
Advertisement
AUTOMATIC
REWI ND
The VCR automatically
rewinds the tape if it reaches the end of
the tape during playback. While rewinding,
you can press
POWER and the VCR will turn off after rewinding.
TAPE
EJECT
Press STOP.EJECT on the VCR (STOP on remote) when it is
stopped to eject the tape.
RECORDI
NG
If you want to record something
that you're watching,
you can
use basic recording.
1.
Set the tape speed by pressing the SPEED button
on the
remote (see "Preferred
Tape Speed" in Setting Up the VCR
section for information
about tape speed settings).
2.
Press the RECORD button
to begin recording.
3.
Press STOP to stop recording.
If you just want to pause the recording
for a short time
(such as during a commercial),
press PAUSE instead of STOP.
CHECK THE SAFETY
TAB
No matter which recording
option
you use, you need to make
sure there is a tape in the VCR, and that the tape's safety tab is in
place. You cannot record on a tape with the safety tab removed.
\
Safety Tab
If the safety tab is removed and you want to record over it,
simply cover the hole with vinyl tape.
23
Advertisement
Table of Contents
