Table of Contents
Advertisement
Using the W°s Features
Channel Banner
There are several items that might appear when you press the
W or INFO button
on the remote. This display is called the
Channel Banner. The following
list describes the items on the
Channel Banner screen (left to right and top to bottom).
SAP
Displayed when the current channel is
broadcasting
SAP (Second Audio
Program) information.
Displayed when V-Chip has been
activated.
KidPass: 2:24
CC
Stereo or Mono
Skip: 0:30
07:18am
06 ABCDEF
(Ix
Displayed when KidPass is set and the
length of time remaining.
Displayed when Closed Captioning
is
available on the current channel.
Stereo displayed when the current
channel is broadcasting
in stereo.
Mono displayed when the current
channel is broadcasting
in mono.
Corresponds to the SKIP button.
Shows the amount of time left before
the IV switches back to the previous
channel.
Displays the current time.
Displays the current channel and label
assigned to the channel.
Displayed when you mute the sound.
Why You Should Use the Auto Tuning Feature
The auto tuning feature automatically
tunes the IV to the correct channel for
different
components
you have connected
to your IV (like a VCR, DVD Player, etc.)
When you set up auto tuning
in the menu system, you don't have to remember to
change your 1V to channel 3; for example, when you want to watch the tape in
your VCR.
How to Set Up the Auto Tuning
Feature
The way you set up the auto tuning feature in the TV's menu corresponds to the
component
buttons on the remote and the way you have each component
connected
to your IV. When you set up auto tuning, you're telling the IV what
channel to tune to when you press the VCR1, VCR2, DVD, or SAToCABLE button on
the remote control.
1. Press MENU (the MAIN MENUappears).
2.
Highlight
Setup and press OK on your remote eontroL
3.
Highlight
Auto Tuning and press OK.
22
Graphics contained
within this publication
are for representation
only
Chapter 3
Advertisement
Table of Contents
