Table of Contents
Advertisement
Using the Remote Contro
Button Descriptions for Other Modes
AUX
Puts the remote in AUX mode. Can also be programmed to operate most
brands of an additional remote-controllable component.
ANTENNA In VCR mode,functions asa lV/VCR button. In SAToCABLE mode,
functions as a lV/receiver button.
DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the
11/and tune to the correct video input channel.
GUIDE
If you're operating
another component
that has an on-screen program
guide, this button accesses the on-screen guide.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
If programmed,
provides
transport
control for some remote-controllable
VCRs, DVD players, and CD players.
SATeCABLE
Puts the remote in SATeCARLE mode and, if auto tuning is enabled,
will turn on the lV and tune to the correct video input channel.
VCR1
Puts the remote in VCR mode and, if auto tuning
is enabled, will turn on
the lV and tune to the correct video input channel.
VCR2
Puts the remote in VCR mode to operate a second VCR and, if auto tuning
is enabled, will turn on the lV and tune to the correct video input channel.
Using the INPUT Button
Use the INPUT button
to scroll through the available video input channels and
view components
you have connected to the TV.
1. Press 1//to
place the remote in lV mode. Make sure the component
you want
to view is turned ON.
2.
Press INPUT to tune to an available video input source and view the
component.
3. To return to the previous channel, continue
pressing INPUT.
12
Graphics conteined within this publication are for representation only
Chapter
2
Advertisement
Table of Contents
