Table of Contents
Advertisement
Indicator
&&o&&
o_o
<:]"BE>
O_O,O
_O,O_O
,O_O,O
0_0
0
Button
Descriptions
for TV Mode
Arrows
Used to point to different
items in the IV menu and to adjust the menu
controls.
Indicator
Indicates the programming
mode when programming
the remote to
control components.
Lights when you press a valid button on the remote.
(0-9} Number Buttons
Enter channel numbers and time settings directly
through
the remote control.
To enter a one-digit
channel, enter a zero first. To enter a two-digit
channel, press
the two digits and expect a few seconds delay. This is in case you want to enter a
third digit.
CN + or CH -
Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue
changing
channels.
CLEAR
Removes any menu or display from the screen and returns you to normal
viewing.
GO BACK
Returns you to the previous channel.
INFO
Brings up channel banner; press again to dear the screen.
INPUT
Toggles through
the available input sources (VIDIISVIDI,
VID21CVID2,
ERNT/SFRNT,CVlD3 and current channel).
MENU
Brings up the Main menu.
MUTE
Reduces the Iv's volume to its minimum
level. Press again to restore the
volume.
OK
When in the menu system, selects highlighted
items.
ON.OFF
When in IV mode, turns the IV on and off. If in another mode (VCR,
DVD, SAT*CABLE, etc.), will turn the component
on and off.
SKIP
Press once before changing channels and the IV will go back to the original
channel after 30 seconds. Press repeatedly to add more time.
SOUND
Displays the SOUND menu.
TV
Turns on the IV and puts the remote in IV mode. Also displays current status.
VOL - or VOL +
Decreases or increases the Iv's volume.
Button Descriptions for Alert Guard
(Listed from left to right)
VIEW MESSAGE
Press to display the alert being issued. If the IV is off, pressing
this button
turns on the IV and displays the message. Press this button
at any time
during an alert or weekly test to display the time remaining until the alert or test
expires.
NEAR VOICE
Toggles the NWR on and off.
STOP ALARM
Turns off alarms and then removes on-screen messages.
NEWS WEATHER
Scans through
the four channels in the order they were set in
the News Weather menu. If no channels have been set up, the default News
Weather station is channel 6. If the IV is off, pressing this button
turns the IV on
and tunes to the first News Weather channel.
Chapter 2
Graphics contained
within this publication
are for representation
only.
1 1
Advertisement
Table of Contents
