Table of Contents
Advertisement
Channel Banner
There are several items that might appear on-screen when
you press the TV or INFO button
on the remote. This display is
called the Channel Banner. The following
list describes the
items on the Channel Banner screen {left to right and top to
bottom).
SAP
Displayed when the current channel
CC
Stereo or Mono
Skip: 0:30
07:18 am
06 ABCDEF
_X
is broadcasting SAP (SecondAudio
Program) information.
Displayed when V-Chip has been
activated.
Displayed when ClosedCaptioning is
available on the current channel.
Stereo displayed when the current
channel is broadcasting in stereo.
Mono displayed when the current
channel is broadcasting in mono.
Correspondsto the SKIPbutton.
Shows the amount of time left before
the -IVswitches back to the previous
channel.
Displaysthe current time.
Displaysthe current channel and
label assignedto the channel.
Displayed when you mute the sound.
Why You Should Use the Auto Tuning Feature
The auto tuning feature tunes the TV to the correct channel for different
components
you have connected to your TV (like a VCR, DVD Player, etc.). When
you set up auto tuning
in the menu system you don't have to remember to change
your TVto channel 3, for example, when you want to watch the tape in your VCR.
How to Set Up the Auto
Tuning
Feature
The way you set up the auto tuning feature in the 1V's menu corresponds to the
component
buttons on the remote and the way you have each component
connected
to your TV. When you set up auto tuning, you're telling the TV what
channel to tune to when you press theVCR or DVD button
on the remote control.
1. Press MENU (the MAIN MENU appears).
2.
Highlight
Setupand
press OK on your remote control.
3.
Highlight
Auto Tuning and press OK.
14
Graphics contained
within this publication
are for representation
only.
Chapter 3
Advertisement
Table of Contents
