Button Descriptions For Tv Mode; Button Descriptions For Dvd And Vcr Modes - RCA 27F650TYX3KCY User Manual

Table of Contents

Advertisement

Indicator
Button Descriptions for TV Mode
Arrows
Usedto highlight different items in the IV menu and to adjust the menu
controls.
Indleator
Indicates the programming mode when programming the remote to
control components. Lights when you press a valid button on the remote. Flickers
when a button is pressed and the batteries are low.
(0-9) Number Buttons
Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
_
_
digit.
_
_'
CC Toggles closed captioning on and off.
_
_
CH + or CH -
Scans up or down through the current channel list. Press once to
E =5"
change the channel up or down; press and hold to continue changing channels.
_"
"_
CLEAR Removes any menu or display from the screen and returns you to normal
viewing.
_,,
_
_,._o_
GO BACK Returns you to the previous channel.
INFO Brings up the channel banner.
INPUT Toggles through the available input sources (VID1/SVIDI, VID2/CVID2,
_
,
FRNT,and current channel].
MENU
Brings up the Main menu.
MUTE Reduces the 1V's volume to its minimum level. Press again to restore the
volume.
OK
When in the menu system, selects highlighted items.
ONoOFF
When in IV mode, turns the IV on and off. If in another mode (VCR,
DVD,etc.) and programmed, will turn the component on and off.
PRESETS Picture options are reset to original factory settings.
SKIP
Press once before changing channels and the IV will wait 30 seconds before
returning to the original channel. Press repeatedly to add more time.
IV
Turns on the IV and puts the remote in IV mode. Also displays current status.
VOL - or VOL +
Decreases or increases the IV's volume.
Button
Descriptions
for
DVD and VCR Modes
AGAIN In DVDmode, replays the last several seconds of the title you're playing.
ANTENNA In VCR mode, functions as a IV/VCR button.
DVD Puts the remote in DVDmode and, if auto tuning is enabled, will turn on
the IV and tune to the correct video input channel.
GUIDE If you're operating another component that has a guide, this button
accesses the on-screen Guide.
OPEN.CLOSE In DVD mode,opens or closesthe DVD disc tray.
Chapter 2
Graphics contained
within this publication
are for representation
only.
9

Advertisement

Table of Contents
loading

Table of Contents