RCA F27700 Owner's Manual page 5

e
Adjust PICTURE TILT switches if necessary.*
Select models have an extra
large color picture tube. The F_ + HIQH I-----7
effects of geomagnetism _ Low
(Earth's magnetic field) may - OFF
cause the picture to tilt slightly.
PO_R,rY STRENGTH
The POLARITY and
STRENGTH switches on the
back of the TV let you
compensate for this effect. If PUR,rV
CORRECTION
the picture appears tilted, follow
these steps to improve it.
• Make sure the STRENGTH switch is in the OFF position as
the diagram shows.
• Move the STRENGTH switch to the LOW position. If this
improves the tilt but it is still not satisfactory, move the
STRENGTH switch to the.HIGH position. This should
correct the situation. If moving the STRENGTH switch
makes the tilt worse, go to .the next step.
• Change the position of the POLARITY switch. If this
improves the tilt but it is still not satisfactory, move the
STRENGTH switch to the HIGH position. This should
Correct the situation.
You may need to reset the POLARITY and STRENGTH
switches if the TV is moved or repositioned in the room,
especially if the TV will be facing a different direction.
8. Set the clock.
,
Repeatedly press the SETUP
button to select the CLOCK
SET display.
Press and hold the - button to select the correct hour
(including AM or PM). Press and hold the + button to select
the correct minute. The correct time will now appear on the
screen whenever you change channels or press the TV or
DISPLAY button.
Note: If power is interrupted for an extended time, you will need
to reset the clock.
Review menus.
Press the VIDEO button to
see the video menu.
Repeatedly press the
VIDEO button to select
desired function and then
press + or - to change it.
Details are on page 9.
Picture R_set : :
Press the A UDIObutton to
see the audio menu.
Repeatedly press AUDIO to
select the desired function
and then press + or - to
change it. Details are on
page 10.
....... SRS ;;;;
Press the SETUP button to see
the setup menu.
Repeatedly press SETUP to _ot_l_mer; _:00_:_ :_@_:_ _
seloct the desired function
and then press + or - to change .........................
it. Details are on page 12.
;_afi:_td!::No_N ::
10. Review other features.
Later, after you feel comfortable with your TV and remote
control, you can review the detailed control descriptions
and special features covered in this manuai.
You can use the rest of this manual as a reference guide to
review detailed information about each operating control
and function. The alphabetical index in the back will help
you quickly locate desired information.
*select inodcls only
3