Table of Contents
Advertisement
m
AUDIO
?
CAUTION
TO AVOID DAMAGE:
1. DO NOT CONNECT
SPEAKER OUTPUT TO A
SEPARATE AMPLIFIER
OR TO SPEAKERS
CONNECTED
TO
ANOTHER PRODUCT,
2. DO NOT CONNECT
LEFT AND RIGHT
SPEAKER OUTPUTS
TOGETHER.
CABLE/ANTENNA
@@
SELECT
OUT Jacks-provide
fixed-level
audio and
video output from whatever
is displayed
on the TV
screen (see notes below).
Provide audio and video
signals suitable for recording.
Can be used for several applications
such as:
• VCR editing with two or three VCRs
(page 30).
• recording
TV programs
onto a camcorder
(page 28).
• recording
cable-TV
programs
onto a VCR that is not
cable-ready
(page 30).
• recording
audio onto an audio cassette
tape recorder
(page 33).
Notes
• Remember that whatever you want to record must be
displayed on the TV screen during recording.
• Video signals from the S-VIDEO connector can not be
recorded from the SELECT OUT VIDEO jack. To record
from an S-VHS component connected to the S-VIDEO
connector, you must also connect the video cable to the
VIDEO INPUT 1 jack and then select channel 91 on the TV
screen.
• On-screen displays such as menus and status displays can not
be recorded from this jack.
@
@
®
22
EXTERNAL
SPEAKERS
Terminals-permit
direct
connection
of auxiliary
speakers.
Connection
details are
on page 27.
CABLE/ANTENNA
Connector-used
when attaching
either a home antenna or a cable-TV system to your TV.
Connection details are on pages 23-24.
SPEAKER
Switch-when
you connect additional speakers
to the EXTERNAL SPEAKERS terminals on the TV, this
switch lets you optimize the sound for the speaker location
you choose.
• If you place the speakers on each side of the TV, put
switch in EXT position. The internal audio from the
TV's speakers will be muted.
If you place the speakers behind the viewer (at the back
of the room), put switch in INT/EXT SURR position.
This maintains normal volume level of the TV's
internal speakers and a surround signal to rear
speakers.
• Details about connecting speakers to the TV are on
page 27.
IMPORTANT:
Always place switch in INT/EXT SURR
position if no external speakers are used (or if external
speakers are ever disconnected).
@(_
INPUT 2
for direct connection of video
Jacks-provide
devices (like VCRs) or compatible home computers and
TV games with vidoo/audio outputs.
To see the signals from a device that is connected to the
INPUT 2 jacks, tune your TV to channel 92.
6(6_ 6(_ INPUT 1 Jacks-provide for direct connection of video
devices (like VCRs) or compatible home computers and
TV games with video/audio outputs.
To see the signals from a device that is connected to the
INPUT 1 jacks, tune your TV to channel 91.
S-VIDEO Connector-provides
for direct S-VHS video
connection from S-VHS VCR or camcorder.
Remember to also connect the S-VHS VCRs or
camcorder's audio jack(s) to the TV's INPUT 1 LEFT
and/or R/MONO audio jacks. This is necessary because
S-Video cables only carry the super video (picture), not
the audio signal. Connection details are on pages 28
and 30.
Signals from S-VHS devices connected to the TV's
S-VIDEO connector and INPUT 1 audio jack(s) can be
viewed by pressing the TV button followed by 9 then 0
on the remote control-(or by scanning to TV channel 90
if you have added "90" to channel memory as described
on page 18).
Note: Remember to connect the S-VHS component's regular
video cable to the VIDEO INPUT I jack Tune to channel 91 if
you are using SELECT OUT jacks.
HI FI OUT Jacks-feed volume-controlled
stereo audio
out from whatever is displayed on the TV screen. Allow
connection of audio amplifier and lets you adjust sound
level with TV's remote.
Advertisement
Table of Contents
