Table of Contents
Advertisement
Special
Recording
onto VCR
(This connection only allows you to record on the VCR
whatever
is currently being displayed on the TV screen)
This is not a common application for recording
with your VCR, but you may find it useful in
certain situations. This connection will let you
record onto the VCR whatever is being displayed
on the TV screen such as a TV program. You'll
also be able to record signals from another VCR
(or similar device) that is connected to the TV's
INPUT 1 or 2 jacks.
The TV must remain turned on during recording.
If you change channels on the TV, the channel
change will be recorded on the VCR tape unless
you pause the VCR during recording.
Because your TV is cable-compatible,
this
application may be used to record cable-TV
programs from the TV onto a VCR that is not cable-
compatible•
You may also want to use this connection to dub or edit VCR
tapes with two or three VCRs. By connecting one VCR (or
camcorder) to the INPUT 1 jacks and another VCR (or
camcorder) to the INPUT 2 jacks, you'll be able to selectively
edit and record whatever is playing on the TV screen onto a
third VCR (or camcorder) connected as shown here to the
SELECT OUT jacks.
If you connect a surveillance system to your monitor as shown
on pag e 28, you'll be able to record what the camcorder is
displaying on the TV screen by connecting a VCR (Or
camcorder) to the SELECT OUT jacks as shown here.
Back of VCR
_
Back of TV
Li
AUtO
HI-FI - OUT - SELECT
! ! A_a,o
L@3,_o
¥
I
II
,._,-I _
l
_.----.--_
J
('_LI
I
_-_
....
"_'
I ,_
I
AudioNideo Cables*
,_x --I I
I
(such as RCA #AH069G)
_
L
I
I
VJDEOsELECT
•
•
s-
"
_DEO
1
LIT
To see the signal from a device connected
to the INPUT
1 jacks,
select channel
91. Select channel 92 to see the signal from a
device connected
to the INPUT 2 jacks.
Notes: Signals from the S-VIDEO connector do not come thru the
SELECT OUT jacks. To record from an S-VHS component, remember
to also connect the regular video cable to the VIDEO INPUT 1 jack
and then tune to channel 91.
You will not be able to record any of the menus or status displays.
• S-VHSCable (such as RCA #186008)*
S-VHS (Super VHS) VCR
.f
(This
connection
allows
you to record
TV programs
and play back
tapes.)
Incoming
Cable
AudioNideo
Cables*
(such as RCA
#AH069G)
Coaxial Antenna Cable*
(suchas RCA #AH037)
/
Back of VCR
Shown here is one method
of connecting
your S-VHS VCR to
your TV. Connect
the S-VIDEO
OUT connector
on the back
of the VCR to the S-VIDEO
connector
on the back of your TV
using an S-VHS
cable.
Remember
to connect the audio cables
from the VCR to the INPUT
1 LEFT and R/MONO
jacks on
the back of the TV. The S-VHS cable carries
only video.
Note: Remember to connect the video cable to INPUT 1. When
recording from SELECT OUT jacks, tune the TV to channel 91 to see
the signal from the S-VHS VCR.
Operation:
If the S-VHS VCR is connected as shown above,
tune the TV to channel 90 to view whatever the VCR is playing.
The word S-VIDEO will appear on the TV when you select
Channel 90.
* Optional accessories are available from most RCA dealers and electronics supply stores.
3O
Advertisement
Table of Contents
