Table of Contents
Advertisement
Thelabeling feature letsyouprogram
names ( orlabels) f or thechannel
numbers. T hename youprogram
will thenappear onthescreen below
thechannel number w henever the
channel number i s displayed.
Each name cancontain uptofour
characters, andyou'll beableto
assign upto 64names. A fter64
names o r labels havebeen entered,
theTV will display thismessage to
let youknownomorechannels c an
belabeled:
C HAN LABEL:
FULL.
Listed below are the letters and
characters
from which you'll be able
to choose when programmingthe
channel labels:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
(blank space) t ° # $ % &' ( )
&+,
./0123456789:;
<=>?@
You must use your remote control to
create or erase labels.
16
Labeling
Channels
(with remote only)
1. Repeatedly press SETUP to select the
CHAN LABEL function.
,
Press + to enter the CHAN LABEL
function. Four blank letter frames
will appear under the channel number.
o
Select the channel number you want
to label by pressing the CHANNEL up
or down button (or by pressing two
number buttons).
+
Press and hold the VOLUME up or
down button until the letter or
character you want appears on the
screen. Pressing VOLUME up
sequences through the characters in
alphabetical order. Pressing
VOLUME down sequences the letters
in reverse order.
5. Then press + to move to the next
letter frame. Pressing - moves you
back to the previous letter frame.
,
Repeat steps 4 and 5 until the name
is complete. You can now label
another channel, if desired, by
selecting the channel number and
repeating steps 4 and 5.
+
When finished, the display will
automatically disappear from the
screen in a few seconds. Your
labels will remain in memory until
you erase them. They are not
affected by power failures.
Erasing Labels
To erase a channel label, first follow
steps 1, 2, and 3 above, and then press
CLEAR on the remote control.
Note: Autoprogramming
new channels
into the channel memory does not affect
the channel labels that are already entered.
Advertisement
Table of Contents
