Table of Contents
Advertisement
Follow one of these steps to connect
a cable-TV
system to your TV instead
of a home antenna.
Since cable-TV
systems
vary, you may wish to consult
your local cable-TV
company
for additional
information.
A
Follow this diagram if your cable company does not require a converter/decoder
box (no scrambled channels):
Incoming
I]_
Cable
_"
I
CABLE/ANTENNA
t°
BACK
OF TV
B
Follow this diagram if your cable company requires a converter/decoder
box that can be controlled by remote control. Most
brands of remote-controllable
boxes can be controlled by the remote that came packed with your TV. Details for
programming your TV's remote to also control the converter/decoder
box are on the next page.
Incoming
CO_¢ERTE_ECODER
BOX
CABLE/ANTENNA
H°
BACK
OF TV
Remember to tune your TV to the output channel of
the converter box (usually 2, 3, or 4) when selecting
channels via the converter box.
C
Follow this diagram if your cable company requires a converter/decoder
box that cannot be controlled by remote control:
Incoming __]--
Cable
®
©
©
CONVERTER/DECODER
BOX
CABI..FJAINTENNA
BACK
OFTV
Note: These optional accessories (2-way splitter (_), A/B switch (_), three coaxial cables (_))
are available as a kit under #AH041BL.*
• The "A" position on the A/B switch lets you select all
non-scrambled channels by the TV's remote control.
• The "B" position allows you to select scrambled channels
via the converter box. Remember to tune your TV to the
output channel of the converter box (usually 2, 3, or 4)
when selecting channels via the converter box.
* Optional accessory available from your RCA dealer or electronics supply store.
24
Advertisement
Table of Contents
