Table of Contents
Advertisement
Repeatedly press t he
SETUP button to
select (highlight) the setup function
you want to change, then press + or -
to adjust it. Pressing the RES/MEM
button lets you move back up the
menu screen.
iii_i_iiiii@
N
iiiiii_iiiii!
The setup menu will automatically
disappear
from the screen if you do not press + or -
within a few seconds.
Via remote control, your TV will "remember"
which function
you displayed
last-even
after the
menu has disappeared
from the screen.
So, if you
want to adjust the same function again, simply
press the + or - button on the remote control.
The last function
you adjusted
will appear on the
TV screen.
The CAPTIONING feature lets you display as text on the screen the audio
portion of certain programs encoded with the Closed Captioning (CC)
information. Four types of closed captioning are available. Select CAPTIONS 1
for full translation of the primary language in your area. CAPTIONS 2 is used
for an alternate service, such as secondary language translation or simplified
English. Two Text modes are also supported.
By setting the SLEEP TIMER, you can program your TV to turn itself off
after a certain period of time. This is useful whenever you want to watch TV
for an hour or so before going to sleep. Press the + or - button to select the
length of time you want the TV to stay on.
You can program your TV to turn on and/or off at the times you choose by
setting the ALARM function.
CHAN LABEL lets you program names (or labels) for the channel numbers.
The names you select will then appear on the screen whenever the channel
number is displayed.
The PARENTAL CONTROL feature lets you lock out any channels that you
don't want your children to watch. Pressing + or - switches this function
from OFF to ON. When this function is set to ON, channels that have been
locked out with the CHAN CTRL function cannot be viewed..When
this
function is set to OFF, all channels can. be viewed.
The CHAN CTRL (Channel Control) function works hand-in-hand with the
PARENTAL CONTROL function. It lets you select the channels you want to
lock out. First select the channel number you want to lock out and then
press + to change this function from NORMAL to LOCKED.
When the
PARENTAL CONTROL function is set to ON, the channels you locked with
this function cannot be viewed.
When you press + or - to start the AUTOPROGRAM
function, the TV will
automatically cycle through all channels and place the active channels for
your area in its channel memory. Pressing the CHANNEL up or down
buttons will then allow you to scan only active channels.
Th.e CHAN MEM function allows you to erase and add channels to channel
memory as desired.
_.
"
The CABLE/AIR function tells your TV whether you have a cable-TV system
_ or a home antenna connected to the TV. Your TV is so automatic that you
will probably never need to change this function. When your TV
"
....autoprograms, it automatically adjusts the CABLE/AIR setting for you. If
ii you should ever need to override the automatic setting, press + or - to
change it.
'
The VCR 1 CHAN function lets you program to which channel the TV will
automatically tune when you press the VCR 1 button on the remote.
The VCR 2 CHAN function lets you program to which channel the TV will
automatically tune when you press the VCR 2 button on the remote.
The CABLE CHAN function lets you program to which channel the TV will
automatically tune when you press the CABLE button on the remote.
After you set the clock, you will be able to see the on-screen time display
whenever you change channels or press the DISPLAY or TV button on the
remote control. To set the clock when this function is selected, first press
and hold - to set the correct hour (including AM and PM). Then press and
hold + to set the correct minutes.
12
Advertisement
Table of Contents
