Table of Contents
Advertisement
AUDIO
CONTROLS
The Audio
menu lets you adjust the controls that involve the TV's audio
outputs.
To access the Audio menu, press MENU on the remote, then
select Audiofrom
the main menu.
MUTE
Turn Mute on (select Sound Off) to set the TV's volume to its minimum
level. The same can be accomplished by pressing MUTE on the remote
control.
TONE
CONTROLS
Lets you adjust the Bass, Treble and Balance. Use the right and left arrow
buttons on your remote to adjust the sliders. Increasing the bass and
treble output
from the TV's internal
speakers increases the low and high
tones, respectively. Adjusting
the balance shifts the audio output
between the left and right internal
speakers.
AUDIO
PROCESSOR
Displays a choice list of available
audio modes, which control the way
the sound comes through
your speakers.
To make settings:
1.
2.
Press MENU to access the main menu.
Select Audio, and then select Audio Processor. Depending
on your
speaker setup, any combination
of the following
options will
appear:
• Mono
Plays the sound in monophonic
audio only. This should
only be used when receiving broadcasts where distance from the
broadcasters
makes the stereo signal weak. The channel banner
displays the word Mono when you tune to a program that is
broadcast in mono.
• Stereo
Splits the incoming
stereo audio signal into left and right
front channels. Most TV programs and recorded
materials
have
stereo audio.
The channel banner displays the word Stereo when
you tune to a program that is broadcast in stereo.
For information
on connecting external
1
speakers to your HDTV, see the section
"Setup and Connections."
46
Advertisement
Table of Contents
