Page 2
WARNING To reduce the risk of electric shock, do not remove To reduce the risk of fire or cover (or back). No user-serviceable parts inside. electric hazard, do not Refer servicing to qualified service personnel. expose this product to rain or moisture.
SETUP AND CONNECTIONS ........Step 1: Unpack the System .............. Step 2: Connect Your TV to Other Components ......6 Jacks and Cables ............= ....7 Front Buttons .......... _ ........Back of the TV ................The Basic Connection ...............
Page 4
Sorting the DIRECTV® Programming Guide ......... The Other Icons ................ADJUSTING TV CONTROLS ........Picture Quality Controls ..............Picture Settings ................ Corot Warmth ................Noise Filter .........._ ......Convergence ................Picture Tilt ................Picture Presets ................Reset Controls ................Audio Controls ................
Page 5
Dish Pointing .................. Your New Access Card ..............Running the System Test ..............Off-Air Guides ................. Upgrades ..................REFERENCE ..............Troubleshooting ................Care and Cleaning ................RCA HDTV Limited Warranty ............FCC Registration Information ............Accessory Information ..............Index ....................
Page 6
High Definition refers to a new way of sending programming information over the airwaves and into your TV. There are two types of TV display formats available. One is ATSC format, which originated from the Advanced Television Systems Committee. The other is NTSC format, which is named for the National Television System Committee.
G ETI'I NG STARTE D SETUP AND CONNECTIONS This section tells you how to get your HDTV set up and ¥ connected. It describes the cables you will need, explains the front and back panels, and walks you through the steps needed to start using your TV.
STEP 1: UNPACK THE SYSTEM Make sure to locate the remote control and power cord. J_J_ STEP 2: CONNECT YOUR TV TO OTH ER PowerCord Remote Control COMPON ENTS During the satellite dish antenna installation, the TV may have been connected with just a coaxial cable for the system test.
S-Video jack carries only the picture signal, not the sound. S-Video Jack Audio/Video Jacks and Cables (RCA-type) The audio/video jacks provide very good picture and stereo sound quality. Theses jacks are used for most audio/video...
FRONT BUTTONS you can use the front panel of the TV to The diagrams below describe the front panel and front input jacks on If you cannot find your remote control, operate many of the TV's features. the TV. Please note that the exact look of the buttons pictured here may be different...
Page 11
FRONT INPUTS The monitor has front inputs for convenience; one set of audio/video inputs and a headphone jack. These jacks let you connect a baseband NTSC (analog) component such as a VCR, Internet access device, game, or camcorder. Look for a hinged door and gently lift the cover open. Please note that the exact look of the jacks or the TV pictured here may be different...
BACK OF THE TV The diagram below describes each of the back panel jacks found on the TV, When connecting A/V cables, be sure to connect corresponding outputs and inputs (video to video, right audio to right audio, etc.). SaTEUUTE caao _CC_SS ÙIGITAL...
Page 13
INPUT 1 Lets you connect a baseband NTSC (analog) component such as a VCR, laserdisc player, Internet access device, or DVD player. • VIDEO provides composite video connection. The video connector usually yellow. • L AUDIO provides left audio connection. The left audio connector usually white.
How to view programming: BASIC CONNECTION To watch cable TV or off-air TV programs from an antenna inthisconnection,press TV and VCR ANTENNA on the remote controluntil ANTENNA A is displayedinthe channel banner. TO watch cable or any other alternate signal, such as digital or analog terrestrial, DISH ANTENNA press ANTENNA on the remote contro_...
THE ADVANCED CONNECTION r After you have made your connections, program the TV to tune to the correct video input channel to see and hear audio TV, VCR, and DVD Player With Amplifier and video from the attached component (VCR, DVD player, etc.). Program your "IV as described in the "System Options and Preferences"...
CONNECTING SPEAKERS TO THE TV AUDIO OUTPUTS You can connect up to two additional speakers to the TV: one to the FIXED VARIABLE RIGHT terminal, and one to the LEFT terminal. If necessary, remove the vinyl covering from the ends of the speaker wire and twist the wire core.
CONNECTING A STEREO AMPLIFIER AUDIO OUTPUTS Use RCA cables to connect either the FIXED or VARIABLE AUDIO FIXED VARIABLE OUTPUT from the monitor to an A/V receiver. • FIXED provides fixed-level audio output from the monitor. This audio output is ideal for connecting...
STEP 3: PLACE BA'I-FERIES IN THE REMOTE CONTROL Follow these steps whenever you need to install or change the batte_'ies in your TV's remote control. Remove the cover from the battery compartment. Insert batteries into the battery compartment, matching the + and - end of each battery. Replace the cover.
TO USE YOUR UNIVERSAL REMOTE In this section you will find out how to use your universal remote control. This section: • defines the buttons on the remote control. USING REMOTE • describes how you toggle between TV "mode" DIRECTV "mode," •...
If you subscribe to DIRECTV ® programming and are in DIRECTV mode, you scroll through DIRECTV® channels. In DVD mode, CH +/- will skip chapters on a disc played by RCA, GE, or PROSCAN DVD players. VOL UPIDOWN Adjusts the TV's audio volume. FETCH...
Page 21
MENU Brings up the main menu and selects highlighted items. When in using an RCA, GE, or PROSCAN VCR and in VCR mode, it functions as a PROGRAM button. CLEAR Removes on screen displays and returns to normal viewing.
VCRs. The remote is already programmed to control most RCA, GE and PROSCAN TVs, VCRs, DVD players, and laserdisc players. TESTI NG TH E REMOTE CONTROL To determine whether the universal remote control...
Using Direct Entry This remote control may not operate all Turn on the component to be programmed. models of the brands that are shown. Use the codes shown in this manual, or on the Look up the brand and code number(s) for the component on the sheet packed with your remote control.
INS AND OUTS OF USING YOUR HDTV This section tells you about the interactive channel banner, which appears when you change channels or press INFO on the remote. It also describes how to change channels and modes and how to use PIP (Picture-In-Picture). This section gives you a broad, clear view o{ how t O operate the basics of your TV.
ABOUTTHE CHANNEL BANNER the channel banner will not look the same The channel banner appears whenever you tune to a channel or press as when you're in DIRECTV mode (if you Please note that when you're in TV mode, - INFO on the remote control. When the banner is displayed, pressing subscribe...
Page 27
CHANNEL BANNER ICONS view an expanded channel banner that Main menu icon When selected, takes you to the main menu. shows a program description (when Press INFO on the remote control twice to TVIDIRECTV logo When selected, toggles between "iV and DIRECTV available).
CHANGING BETWEEN DIRECTVAND MODE When you change channels by entering numbers with the remote controt, you tune to programming that can come from one of three different sources: the DIRECTV satellite (if you have DIRECTV service), a terrestrial off-air antenna, or cable TV.
CHANGING CHANNELS To change channels by entering numbers with the remote control, remote needs to be in the correct "mode": either DIRECTV mode (if you subscribe to DIRECTV) or "iV mode. When you want to watch DIRECTV ® programming, DIRECTV button put the remote in DIRECTV mode...
PIP (PICTURE-IN-PICTURE) OPERATION The PIP (Picture-In-Picture) feature lets you display a second, smaller be able to use PiP with analog (NTSC format) picture on top of the main analog picture. analog channels. I Note that you will only Your TV is equipped with a dual NTSC tuner that tunes to cable or off-air television signals.
PiP PROBLEMS? If you are channel surfing and the PIP disappears, you may have tuned to a digital channel. To view PIP and the main picture, make sure that both the main and PIP channels are analog inputs, or signals. Continue changing the channel until you find an analog (NTSC format)
USING THE INPUT BUTTON Repeatedly press the INPUT button to scroll through the available input sources until you find the input associated with the component (such as VCR or DVD player) you want to view. Input -- source Watch the channel banner to see the input sources change with each press of the INPUT button.
WHAT IS A PROGRAM GUIDE? A program guide is an on-screen programming schedule. It is ¥ a list of the current and future programs. There are separate guides for TV programs and DIRECTVe programming (available if you subscribe to DIRECTV® programming), Both of these guides can be viewed in different formats.
BRINGING UP THE PROGRAM GUIDES If you subscribe to DIRECTV ® programming, you have access to two program guides: a DIRECTV ® programming guide and a TV program guide (for terrestrial programming). If you do not subscribe to DIRECTV ® programming, you will have one guide: the TV program...
ANATOMY O F TH E TV P ROG RAM G U I D E To access the TV program guide: Press the TV button on the remote control. Press GUIDE on the remote control, The following diagram shows you the kind of information you will see in the "IV program guide, Note that the availability of TV program...
ANATOMY OF THE DIRECTV ® PROGRAMMING GUIDE To access the DIRECTV® programming guide, you must subscribe to DIRECTV® service. Press the DIRECTV button, then press GUIDE on the remote control. following diagram shows you the kind of information you will see in the DIRECTV ®...
GETTING AROUND IN THE GUIDES the guide, continuously press the right arrow button on the remote control to There are several ways to change channels and move around the TV and I To view a listing of future programming in | scroll to the right.
USING THE GUIDE BU'I-I'ON Each press of the GUIDE button on the remote control takes you to an alternate type of TV or DIRECTV® programming guide: Detail Guide, SurfGuide (DIRECTV only), or Grid Guide. By default, the Detail Guide appears when you press GUIDE on the remote control.
to that channel by pressing OK or get more information by pressing the INFO I You can highlight any program then tune button. Channel Guide lets you see programs on a specific channel. SurfGuide" (available with DIRECTV only) Displays seven DIRECTV ®...
SORTING DIRECTV e PROGRAMMING GUIDE Sorting the guide is a way of organizing the DIRECTV® programming guide to show only the types of programs that interest you. There are several on-screen buttons that sort the DIRECTV guide in different ways. The Sorting icons appear at the bottom of the Grid Guide...
Page 41
SORTING DIRECTV ® PROGRAMMING GUIDE BY MOVI Movies icon Select the movies icon to tell the DIRECTV® programming guide to list only DIRECTV movies. After you select the movies icon, it changes to a movies themes icon. Select the movies themes icon to sort the guide to list movies by type, such as comedies or musicals.
Page 42
SORTING CURRENT DIRECTV ® PROGRAMMING GUIDE ALPHABETICALLY The AlphaSort'= feature lists all the program titles in the current AlphaSort icon DIRECTV _ programming guide in alphabetical order. You can also find this icon in the channel banner. Select the AlphaSort icon to search for specific program titles that are in the current guide, After listing...
Page 43
Select Enter Text to set up the information the Scout feature will On-screen icons represent the look for in all program guide titles. status of the scout feature: Use the on-screen keyboard to enter the desired search parameters. For example, if you are interested in tennis events, enter a common indicates the Scout...
THE OTHER ICONS These icons are located on both the DIRECTV and TV program guides. Exit Exits the guide and returns you back to where you were before entering the program guides. Exit icon Help Brings up additional information about the guide. Press OK to continue. Help icon Down Arrow...
MAKE ADJUSTMENTS TO YOUR PICTURE AUDIO The following section tells you how to adjust the picture quality and audio quality of your TV. • The Picture Quality menu contains the controls that let you adjust the picture. • The Audio menu contains the controls that let you adjust the way the audio sounds.
PICTURE QUALITY CONTROLS The Picture Quality menu contains all of the TV's video configuration controls. To access the Picture Quality menu, press MENU on the remote control to go to the main menu, then select Picture Quality. Picture Quality menu for model P61310 is pictured here. PICTURE SE'rFINGS The Picture Settings menu displays the controls for adjusting...
NOISE FILTER Noise filter displays a list that lets you set one of three automatic settings that allows you to reduce picture "static" or any type of interference. You can set Noise Filter to Off, Low, or High. When set to Off, no noise reduction occurs: When set to Low, the television produces a softer, smoother...
AUDIO CONTROLS The Audio menu lets you adjustthe controls that involve the TV'saudio outputs.To access the Audio menu, pressMENU on the remote, then select Audio from the main menu, MUTE Turn Mute on (select Sound Off) to set the TV's volume to its minimum level.
• *SRS Stereo (o) Is an audio processing technology that adds greater depth and stereo separation to stereo audio signals. fixed audio jacks, see the section "Setup • *SRS FOCUS (.) Focuses audio signals by adding treble and making and Connections" under "Back of the TV" For more information on the variable and dialog...
Page 50
Icon in the Channel Banner You will find an audio language icon in the channel banner. Audio language icon If the icon is highlighted while watching a digital (ATSC) or DIRECTV channel, two or more audio languages are available. Selecting the icon repeatedly scrolls through and plays the options.
CREATING USER PROFILES This section describes the user profiles feature. It includes information about: ¥ • creating a profile's TV and DIRECTV viewing lists. • setting spending limits. • setting DlRECTV®programming, TV, and movie rating limits. • blocking unrated TV programs. •...
ABOUT PROFILES Use the MENU button on the remote control to bring up the main menui use When you select Profiles from the main menu, you can create four the arrows to highlight an option, and press OK to select it. different profiles in addition to the default...
Check the channels you want to include in the list (programming subject to change). Use the arrow buttons to point to a DIRECTV channel, and press OK to remove (or replace) the check mark. To go directly to a certain channel, enter its number using the digits on the remote control.
Page 54
Use the digits or the arrow buttons on the remote control to enter a Important! single-program spending limit. Lock the system. See "Locking the System" near the end of this You need to lock the system in order for rating limits, channel limits, and spending section for details.
Page 55
SETUP You can establish TV channel lists, set spending limits, and set rating limits for TV programs using the TV Setup menu. EDITING CHANNELS IN ATV LIST You should create a TV channel list to establish which TV channels (including both analog and digital) the selected profile can access.
SE'n'ING THE TV RATING The Set TV Rating menu enables you to program your TV so children cannot see certain programs or channels. The last three choices in the TV Setup menu involve software inside your TV (often called V-Chip) which allows you to "block"...
Page 57
To set TV programming limits: From the main menu, select Profiles. Select the user name you would like to set limits for through the Profiles menu. Select TVSetup from the next menu. Select Set TV Rating. Remember you are only olocking TV programs and movies for the one Profile you select in the Profiles menu.
Page 58
BLOCKING AGEIBASED RATINGS When you change the status of a rating to Block, the system will automatically block You can automatically block all program ratings above a specified age- higher ratings and all corresponding based rating level. For example, if you only want your child to .watch content themes.
Page 59
Blocking Specific Content Themes You must remember to lock the system for You can block programs based on their content. (Content is ,rating limits to take effect. represented by the D, L, S, V, and FV on your screen. See "Setting the I"V Rating"...
Page 60
SEI_'ING THE MOVIE RATING Please note that the rating limits you set while in the TV Setup menu apply only to You set movie rating limits by blocking movies rated above a specified TV programs--they do not apply to level. To access the Set Movie Rating menu: DIRECTV ®...
Page 61
Viewing Moving Ratings Some movies may be given a "Not Rated" rating. After blocking movie ratings, you must After you block movie ratings, you have the option of going back separately set "Not Rated Movies" to View to and changing some of the rating status buttons back to View: see these movies.
CHOOSING YOUR PROFILE Each time you turn on the TV, the Family profile is selected by default. To select a different profile: Press the WHO button to scroll through the profiles in the channel banner. The WHO button toggles through the profiles.
LOCKING UNLOCKING A USER Don't Forget Your Password PROFILE If you forget a USER password and the system is locked, you need to unlock the system and then assign a new user password. If the - When you lock a profile, you prevent anyone who does not know system is not locked, select Profiles from the the user password from accessing the locked profile.
LOCKING THE SYSTEM When you lock the system, all limits set up for all profiles are put into The Lock/Unlock icons in the channel effect, regardless of whether the profile is locked or unlocked. Unlocked banner are an easy way to lock or unlock the system.
DI FF ERENT WAYS TO ADJ UST YOU R H DTV This chapter describes the other options available to you such • selecting a signal source and type • auto tuning your remote control to tune to the VCR1. VCR2, or DVD channel •...
CHANGING THE SIGNAL SOURCE The Signal Source menu allows you to choose the source from which you would like the signal to come: Antenna A, Antenna B, DIRECTV, or Video Inputs. The same can be+accomplished using the ANTENNA, DIRECTV, and INPUT buttons on your remote control.
AUTO TUNING This menu displays the various components you have connected to your TV. It lets you set up the TV to automatically tune to the correct input channel when you press a device button (VCR1, VCR2, or DVD) on the remote control.
CHANNEL SEARCH remove unwanted channels by using the You can also edit the TV channel list and Engaging in a channel search tells the TV to search automatically for all Profiles menu. the terrestrial TV channels available through the antenna inputs.
Mail provides the latest information from program providers. PURCHASES: PAY PER VIEW PROGRAMS Pay Per View programs (PPV) are DIRECTV programs that you purchase-- like a movie ticket--if you subscribe to DIRECTV ® programming. You can system password to order a PPV program if preview movies on certain channels to determine if you would...
Page 70
To purchase a movie or event, you can take one of two actions: • Tune to a PPV by channel surfing within DIRECTV ® channels and finding a PPV channel. When you find it, press the INFO button find more information and details about how to purchase it.
Page 71
USING THE ATTRACTIONS GUIDE Your program providers may offer future programming events not currently listed in your DIRECTV program guide. These events are called "coming attractions" and can be previewed in the Attractions Guide. To access the Attractions Guide: Press the DIRECTV button on the remote control.
Page 72
USING PURCHASES MENU The Purchases menu allows you to review upcoming and past DIRECTV Pay Per View purchases and edit spending limits. The Purchases menu shows you upcoming or past DIRECTV purchases and spending limits. The list of purchases may be longer than one screen; use the down arrow button on the remote control to see more items.
SE'I-I'ING THE TIME DATE You can set the current time and day, the current date, the time zone, and whether or not you observe daylight saving time. you made will be discarded and the time and date will be reset to the last saved I If you select Use Defaults, any changes settings.
TRANSLUCENCY Note that when tuned to the device You can adjust the level of translucency that the menu screens and connected to the component video input program guides possess. Adjust the slider up for more translucency (the jacks, translucency is set to opaque and cannot be changed.
CAPTION DISPLAY The Caption Display menu displays a choice list that lets you choose when closed captioning information is shown on the screen. Closed Captioning Captioning information is shown always, when available. Closed Captioning No captioning information is displayed. On When Muted Captioning information is only shown when the TV's...
USING FETCH The Fetch menu is a list of eight convenient menu items. It serves as a shortcut to access these menu items. For instance, instead of going through four steps to access the Signal Meter (pressing MENU, selecting Assistance, selecting Dish Pointing, then selecting Signal Meter), you can press FETCH on the remote and...
NEED HELP? If you run across any problems or need,to rely on the system to give you feedback, you should use the Assistance menu to get information. This section explains the different types of assistance your system is capable of giving you.
RUNNING THE INTERACTIVE SETUP You should have completed the interactive setup the first time you plugged in your TV. However, if you need to access the interactive setup again, you can-access it through the Assistance menu. Press MENU on the remote control to access the main menu. The interactive setup process allows Select Assistance from the main menu.
DISH POINTING The Dish Pointing menu helps you set up your HDTV and optimize your reception of the satellite signal. SELECTING DISH TYPE It is important to complete each of the following steps required for your Peak Signal satellite dish antenna. If you do not, you will not receive proper dish The "Peak Signal"...
Page 80
FIND YOUR DISH POINTING COORDINATES Use one of the available methods {ZIP Code, Latitude/Longitude) to find your dish pointing coordinates. Follow these steps to obtain your dish pointing coordinates using the ZIP Code of the dish installation location: Press MENU on the remote control to bring up the Main menu. Select Assistance, then Dish Pointing.
Select a satellite location (such as 101W). If the satellite dish antenna is pointed correctly, the signal meter will show you the current signal strength and you should hear a continuous tone. If you are using an oval satellite dish, select the second satellite group and obtain a signal.
OFF-AIR GUIDES If you are certain your antenna is properly set up and receiving a strong signal, but you are receiving invalid program guide information or are having trouble tuning to a channel, you can disable your system's ability to acquire off-air TV program guides. If you subscribe to DIRECTV ® programming, you will still receive DIRECTV ®...
G E'IIFING INFORMATION This section contains troubleshooting information, your RCA limited warranty, and accessory ordering information. ¥ ¥ REFERENCE...
TROUBLESHOOTING Can't select certain channel • Channel may be blocked or not approved in the Profiles menu. If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct "mode." Noisy stereo reception May be a weak station. Change to mono mode instead of stereo in the Audio menu under Special Audio.
Blank screen Maybe the component (VCR, DVD, etc.) connected to the input jacks is not on. • Try another channel, because there may just not be any programming on at that time. • Cables in back may be disconnected. TV will not turn on •...
• If the representative determines that you should receive service they will provide you with name(s) of the closest RCA Digital Television Authorized Service Center(s). • Contact the Service Center and arrange for home service.
FCC REGISTRATION INFORMATION Your HDTV is registered with the Federal Communications Commission and is in compliance with parts 15B and 68, FCC Rules and Regulations. Notification to the Local Telephone Company. On the back of this equipment is a label indicating among other information, the FCC Registration number and Ringer...
Screw-on Cable* attaches to the _::_lmi_ Standard Audio/Video cable with RCA-type phono plugs. VH83 round antenna connectors (called 75- ohm F-type) on the back of your VCR or TV. The ends screw onto the Monaural VCR Dubbing Audio/ connectors for a secure connection.
Page 89
Accessory Order Form Remote Control This is the Total Description remote control that came Screw-on antenna cable* (3-ft) packed with your TV. Screw-on antenna cable* (6-ft) VH82 $3•95 Replacements or spares can be ordered as needed• Push-on antenna cable* (6+ft) VH89 $5.95 Weatherproof...
Page 90
Placing an Order Charge your order on your VISA, MasterCard, or Discover Card by To place your order by phone, have your Visa, MasterCard filling in below or Discover Card ready and call the toll-free number listed USE YOUR CREDIT CARD below.
INDEX Blocking DIGITAL AUDIO OUT jack 10, 47 Age-based ratings A-Z icon 34, 40, Content themes Digital terrestrial Access card 10, 79 DIRECTV Bright lighting Number Button 16, 18, 82 Buy programs Accessories Channel list 50 Age-based ratings Rating limit Blocking Setup Cables 10...
Page 94
Jack 7, 10 Maximum signal strength Line 7 MENU button 8, 19 Getting around in the guides Menus PHONES jack 9 Picture Icons 62 GO BACK Controls Profiles Button on the remote Presets 45 Modes GO BACK button Quality 44, 77 Of operation Grid guide SAT and TV 26...
Page 95
And DIRECTV button on remote The DIRECTV guide Rating limit Button By movies Ratio (16:9 and 4:3) 72 Mode By sports RCA-type cables 7 By title Rating limit Remote control By topics Buttons Using movies icon 39 codes 22 Using sports icon 39...