Table of Contents
Advertisement
SETUP AND CONNECTIONS
CONNECTING YOuRVCR OR
LASERDISC
PLAYER
Use common
RCA cables (not provided)
to connect
your VCR or laserdisc
player to your Cinema
Screen monitor.
To connect
your VCR or Laserdisc
player:
1.
Turn off the power to the monitor
and VCR or laser disc player.
2.
Connect
one end of your RCA cable to the video output
connector
on
the back of your VCR or laser disc player. Connect
the other end to the
video input on the monitor.
3.
Use standard
RCA cables to connect
the audio from your VCR or laser
disc player to AU DIO2 input jacks on the monitor
(if your VCR or laser
disc player has this capability).
Be careful to keep your right and left
channel
connections
correct for stereo sound.
4.
Turn on the Cinema
Screen monitor
and the VCR or laser disc player.
NOTE: Refer to your
VCR or laser disc player user's manual
for more
information
about your equipment's
video output requirements.
RCA cables (audio/video cables) are sold as a bundled set.
CONNECTING Y OURDVD
PLAYER
To connect
your Cinema
Screen monitor
to a DVD player:
1.
Turn off the power to the monitor
and DVD player.
2.
Use a standard
video cables to connect
your DVD player to the
CMNT1
input on the monitor,
or use the DVD player's S-Video output.
(Use a standard
S-Video cable to connect
to the S-Video input on the
Cinema
Screen monitor.)
3.
Turn on the monitor
and the DVD player.
CONNECTING
A PERSONAL
COMPUTER
If you have a computer
with digital
RGB output,
connect
it to the RGB3
.jack on the monitor.
For IBM VGA (or compatible)
or Macintosh
(or compatible)
connect
to the
RGB1 jack on the monitor.
10
Advertisement
Table of Contents
