The Buttons On The Remote Control - GE 31GT750 User Manual

Using the Remote Control
L.E.D.
VCRI OH DFF iV
DVD VCR2 AU× SAT,CABLE
MUTE SKIP
SOUND GO 8AO(
GUIDE INFO
MENU CLEAR
,02Q'O
40,0 0
,0,0,0
w"°6°'O0 A'60A
R[VERSE PLAY FORWARD
REC÷VCR ÷ STOP PAUSE I
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numbers and time settings directly
through the remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit channel,
press and hold the first digit for two seconds until two dashes appear to the right
of the number, then add the second two. Example: to tune to channel 123, press
and hold 1 for two seconds, press 2, then press 3.
Arrow buttons (up, down, left, right) Press the arrow buttons to move through
the on-screen menu system. Also moves PIP window to different areas on the
screen.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in SAToCABLE mode.
AUX (auxiliary) Puts the remote in auxiliary mode to operate the component
you've programmed the remote to operate with this button. You can program
this button to control a cable box, most RCA, GE and PROSCAN audio
components, a laserdisc player, or a VCR. If you set up the Auto Tuning feature
(Chapter 3), pressing the AUX button automatically tunes the TV to the
correct channel.
CH (up and down) buttons Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
changing channels.
CH CTRL (Channel Control) Selects the picture window (main window or PIP
window) that changes when you press the channel up or channel down button
or the WHOoINPUT button.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
DVD Puts the remote in DVD mode. If you set up the Auto Tuning feature
(Chapter 3), pressing the DVD button automatically tunes the TV to the
correct channel.
FORWARD If you're operating a VCR or DVD Player with the remote control,
press FORWARD to advance a disc or videotape.
GO BACK Returns you to the previous channel.
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen:
press GUIDE again to remove it from the screen.
INFO Displays channel information.
LE.D. (light-emitting diode) The little light on the remote that lights when you
are programming the remote. It also lights when yon press a valid button on
the remote.
MENU Displays the TV's Main menu. You can also press and hold for 2 seconds
to display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that
is highlighted.
22 Chapter2