Using Your Tv And Remote; With Remote Buttons - GE TV User Manual

Using Your TV and Remote

With Remote Buttons

REW PLAY
REC STOP
DISPLAY
CHAN
VOL VOL
CHAN
MUTE
1 2 3
4 5 6
7 8 9
INPUT
0
MENU•PROG
CLEAR
MOVE
6
POWER
Turns off the TV.
Turns off compatible components.
Turns on a component after a
component button is pressed.
AUDIO, VCR1, VCR2•LD,
FF
SAT•CABLE, TV
Sets the remote to control the
PAUSE component. VCR2•LD can only be
programmed for one component:
either a VCR or a Laserdisc Player.
SKIP
See Using the Remote with a VCR,
Satellite Receiver, Cable Box, Laserdisc
Player and Audio equipment on
pages 8–15.
PREV CH TV
Turns on the TV.
Shows the displays on the screen.
Sets the remote to control the TV.
See Using the Remote with a VCR,
Satellite Receiver, Cable Box, Laserdisc
ANTENNA
Player and Audio equipment on
pages 8–15.
RESET
REW (Rewind)
Rewinds a tape or laserdisc.
Searches backward while tape or
laserdisc is playing.
PLAY
Plays tape or laserdisc.
FF (Fast Forward)
Fast forwards a tape or laserdisc.
Searches forward while tape or
laserdisc is playing.
REC (Record)
Starts recording onto tape.
STOP
Stops tape or laserdisc.
PAUSE
Pauses tape or laserdisc.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
SKIP (Commercial Skip)
Allows you to scan other
channels during commercials.
Each press adds 30 seconds. TV
switches back to original channel
when time runs out. Press
CLEAR to cancel SKIP.
2 1
CHAN and
(Channel up and down)
Scans up and down through
channels in the TV's memory.
Moves through channels
in VCR's memory.
+ –
VOL and
(Volume up and down)
Raises and lowers sound.
MUTE
Switches the TV sound on or off.
PREV CH (Previous Channel)
Changes back and forth between
two channels.
Select a channel and then select
another. Press PREV CH to
switch between the two channels.