The Buttons On The Remote Control - GE 27GT730 User Manual

Using the Remote Control
L.E.D,
VCR1 ON I FF W
DVD VCR2 AUX SAI .CABLE
SS°S S=
MUTE _KIP
CH" O
SOUNO GO BACK
GUIOE JNFO
MENU CL[AR
'0 '0' 'C:'
,0,0 ,O
WflO'INPUT ANTENNA
o,0 o
REVERSE PLAY FORWARI
IEC'VCI STOP IUSE
The Buttons on the Remote Control
0-9 (Number
buttons) Enter channel numbers and time settings directly
through the remote control.
To enter a two-digit channel, press tile two digits. To.enter a three-digit channel,
press and bold the first digit for two seconds until two dashes appear to the right
of the number, then add the second two. Example: to rune to channel 123, press
and hold I for tx_'oseconds, press 2, then press 3.
Arrow buttons (up, down, left, right) Press the arrow buttons to move through
tlte on-screeu menu system.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in SAT*CABLE mode.
AUX (auxiliary) Puts the remote in auxiliary mode to operate the component
you've programmed the remote to operate with this button. You can program
this button to control a cable box, most RCA, GE and PROSCAN audio
components, a laserdisc player, or a VCR. If you set up the Auto Tuning feature
(Chapter 3), pressing the AUX button automatically tunes the TV to the
correct channel.
CH (up and down) buttons Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
changing channels.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
DVD Pros the remote in DVD mode. If you set up the Auto Tuning feature
(Chapter 3), pressing the DVD button automatically tunes the TV to the
correct channel.
FORWARD If you're operating a VCR or DVD Player with the remote control,
press FORWARD to advance a disc or videotape.
GO BACK Returns you to the previous channel.
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen:
press GUIDE again to remove it from the screen.
INFO Displays channel information.
L.E.1D. (light-emitting diode) The little light on the remote that lights when you
are programming the remote. It also lights when you press a valid button on
the remote.
MENU Displays the TV's Main menu. You can also press and hold for 2 seconds
to display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that
is highlighted.
ON*OFF Tnrns the TV on and off. When the remote is in another mode (VCR,
DVD, Satellite, etc.) and the remote is programmed to operate that component,
you can press ON-OFF to turn the component on and off.
22 Chapter 2