Table of Contents
Advertisement
Connections
& Setup
Step 1: Identifying
Your TV's Location
l.
If your country is highlighted,
press OK on the remote control•
If your country isn't highlighted,
press the up or down arrow button
on the
retr]ote control
to highlight
your counu T and press OK.
2.
Use the number
buttons
on your remote to enter your zip code.
Press OK when you're finished.
Note: If your postal code contains
letters, press the up and down arrow buttons
on
your remote to enter letters, and press the right arrow button to go to the next
space. The left arrow button moves you to the leff.
Step 2: Configuring
for Cable
The next series of screens asks you about your cable setup. To supply your TV
with the correct TV program
listings, the GUIDE Plus+ system needs to know if
your TV is connected
to cable.
1.
If your TV is connected
to cable, highlight
Yesand press OK.
If your TV isn't connected
to cable, highlight
No and press OK (STEP 3:
Configuring for a VCR appears).
.
If you have a cable box connected
to this TV, highlight
Yesand press OK on
your remote
control.
Note: The next series of screens is very important
because the GUIDE Plus+
system must find
the correct cable box information
in order to receive the correct
TV program
listings.
If you don't
have a cable box connected
to this TV, highlight
Noand
press
OK (STEP 3: Configui'ing,[or
a VCR appears)•
77p
If you're not sure which channel
is
the cable box's output
channel,
consult
the book that came with
your cable box or contact
your
cable company.
16
Chapter
1
Advertisement
Table of Contents
Troubleshooting
