Back Panel - RCA P46733 Owner's Manual

BAC K PAN EL
--
wind
mm
INPUT 1 Lets you connect a video component such as a VCR,
DSS® receiver, or laserdisc player.
L/MONO Provides left audio connection, or, if you are
connecting a mono component, use the IJMONO input.
The left audio connector is usually white.
RIGHT Provides right •audio connection. The right audio
connector is usually red.
VIDEO Provides video _onnection. The video connector is
usually yellow.
S-VIDEO Lets you connect a component with S-Video
capability, such as a DSS® receiver or S-VHS VCR. When
using S-Video, make sure to connect the three audio/video
cables as well as the S-Video connector.
INPUT 2 Provides connection to a second video component
such as a VCR or laserdisc player.
L/MONO Provides left audio connection. Or, if you are
connecting a mono component, use the L/MONO input.
The left audio connector is usually white.
RIGHT Provides right audio connection. The right audio
connector is usually red.
VIDEO Provides video connection. The video connector is
usually yellow.
s-ViDEO Lets you connect a component with S-Video
capability, such as a DSS® receiver or S-VHS VCR. When
using S-Video, make sure to connect the three audio/video
cables as well as the S-Video connector.
SIGNAL SOURCE Provides connection to a home antenna or
cable-'i'V system.
32
The ANT B input can be used
for video games or home com-
puters, and you can switch be-
tween the two inputs using the
ANTENNA button on the remote.
If you are recording from INPUT
1 and you are using S-Video, re-
member to connect the regular
INPUT 1 VIDEO cable as well.