RCA P46733 Owner's Manual page 45

Normal List Only the channels included in the Normal
list are available wheo: you scan up and down using the
CHAN buttonsi_i:Use:i:tl_e uP_ _;: and down arrowst0 indicate
whether the channel number_ndicated is included (YES)
or is not included (NO) _nthe Normal channel list.
P_rent Approved use the up and down arrowsto
• choose whether:the Channel indicated should be Shown
when the ParentaI-Co, ntrol feature is turned on.' Select YES
to indicate that thechannel can be shown at any time,
regardless ofwhetlier Parental Control is turned on. Select
NO t0 in'dicate tiiat thefront panel cannot tune to that
• channel when Parental control is turned on. Important:
You must turn the Parental Control feature ON in the
Parental Control control panel (see above).
Auto Channel Search Displays a control panel that lets you
tell the TV to search automatically for all the channels
available through the antenna input(s). When the TV finds an
active channel, it places it in the channel list; inactive
channels (weak stations or channels, with no sigrtal atali) will
be remcwed from the channel list.
Auto Tuning Displays a choice list that lets you set up the TV
to automatically tune to the correct input channel when you
press VCR1, VCR2=LD, or DSSoCABLE.
Set VCR 1 Channel Displays a choice list that lets you
select the channel that the TV tunes to when you press
the VCR1 button. The choices are:
Not Connected Choose this if you do not have a VCR
connected to an antenna or Video input on the back of
the TV, or if you don't want the TV to tune to a channel
when the VCR1 button is pressed.,
Channel 3 Antenna A Choose this if your VCR is
connected to the Antenna A jack on the back of the TV,
and you want the TV .to tune to channel 3 when you press
the VCR1 button.' Reminder:-Make sure the VCR's Ch 3/4
switch is set to channel 3.
Channel 4 Antenna A Choosethis if your VCR is
connected to the Antenna A jack on the back of the TV,
and you want the TV to tune to channel 4 when you press
the VCR1 button. Reminder: Make sure the VCR's Ch 3/4
switch is set to channel 4.
Auto Tuning is part of the interac- 1
ive setup routine. Formore, see •
_lnteractive Setup, p. 15, . " " .
43