Table of Contents
Advertisement
Blank screen
• Maybe the device connected to the input jacks is not turned on.
• Try another channel.
• Press RESET, in case the picture controls are set too low.
No sound,
picture
okay
• Maybe sound is muted.
Try pressing volume up button to
restore sound.
• Maybe TV's speakers are turned off.
Check Speakers
OnlOff function.
• If using an s-VHs component,
remember
to also connect the
component's L and R AUDIO OUT jacks to the TV's L and R
INPUT 1 jacks.
• Maybe SPEAKER switch on the back of the TV isnot in the
iNTERNAL position.
Can't select
certain
channel
• If using a VCR, check to make sure the TV/VCR switch on the
VCR is in the correct
position.
Noisy stereo
reception
• May be a weak station.
Use SRS button to change to mono
mode instead
of stereo.
No picture,
no sound
but power
light
is on
• Maybe someone changed cable/air function to wrong position.
• Maybe a vacant channel is tuned.
• If watching
VCR (connected only through antenna
input),
make sure TV is tuned to channel 3 or 4 - same as CH3/4
switch on VCR. Also check to make sure TV/VCR switch on
VCR is in correct position.-
Sound
okay, picture
poor
• Check antenna
connections.
• Try adjusting* sharpness function
to improve
weak signals.
Black Box appears
on the screen:
• Captioning
may be turned on. Checlc the Closed-Caption
Display control panel in the Channel Menu.
r
4.
73
Advertisement
Table of Contents
