Table of Contents
Advertisement
Front Panel (listed alphabetically)
If you misplace your remote control, you can use the buttons on the front of your TV to operate the TV. There are also a
set of audio/video
jacks on the front of the TV that are convenient
for connecting
a camcorder
or video game device.
CH + and -
Scans up and down through the current channel list.
INPUT
Press to access the TV's video input channels
that correspond
with the jacks used to connect components.
POWER Button
and Indicator
Turns the TV on or off'. The POWER indicator lights when the power is on.
Remote
Sensor
Receives signals from the remote.
Aim remote at this sensor with no objects between
them.
TIMER Indicator
Lights when the Sleep Timer or Timer have been activated.
VOL + or -
Increases and decreases
the volume.
VIDEO, L/MONO, and R Input Jacks
Receives audio and video signals from another component,
like a video gaming
device or camcorder
when the component
is connected
to these jacks. To select these front panel jacks, press INPUT on
the remote until LINE 2 appears.
TVbackpanel
LINEIN
LINE
COMPONENT-IN
IN 1
IN 3
OUT
VIDEO
AUDIO
,o,o ® ®
. ® ® ®
®,
AUDIO
ANT/CABLE
75.('1
Back Panel (listed left to right)
LINE IN/IN1 and IN3 AUDIO (L and R) and VIDEO Jacks
Receives signals from another component,
such as a VCR or
DVD Player, when the component
is connected
to these jacks. To see the content
coming from the component
connected
to these jacks, press the INPUT button on the remote until LINE i (or LINE 33 appears
on the screen.
LINE OUT AUDIO (L and R) Jacks
Sends audio signals from the TV to another component,
like a stereo amplifier or
speakers
when the other component
is connected
to these jacks.
COMPONENT
INAUDIO
(L and R) and VIDEO Y, PB (CB)' and PB (CR) Jacks
Receives signals from another component
having COMPONENT jacks (like a DVD player) when the component
is connected
to these jacks. To see the content
coming from the component
connected
to these jacks, press the INPUT button on the remote until COMPONENT appears
on the screen.
ANF/CABLE Jack
Receives a signal from an antenna or cable system when the TV is attached with an RF (coaxial) cable.
40
Chapter
5
Advertisement
Table of Contents
