Pip (Picture-In-Picture)Operation - RCA P46733 Owner's Manual

PI P (PICTURE-IN-PICTURE) OPERATION
The PIP feature (picture-in-picture) lets you display a second,
smaller picture on top of the main picture.
Main Picture
There are six remote buttons that control the way the PiP
window works:
PIP Brings up the PIP window. PressPIP again to remove
the window.
MOVE PIP Lets you movethe PIP window to the four corners
of the screen. (You can also use the MOVE arrows to position
the PIP window.)
FREEZE Takes a snapshot of the video in the PIPwindow. To
unfreeze the video, change channels in the PIP window or
press SWAP.
SWAP -Switches, or "swaps," the video from the PIP window
with the main picture.
CH CTRL (Channel Control) Pressing PIP automatically places
channel control in the PIP window. CH CTRL lets you transfer
channel control back to the main picture.
SCAN Pressing SCAN causes the TV to automatically scan
through your channel list. If channel control (see above) is on
the main picture, the main picture will scan through the
channels. If channel control is on the PIP window, the PIP
picture will scan through the channels. Each channel is
displayed for four seconds before the TV automatically tunes
to the next channel in the list.
Press SCAN again to stop the channel scan.
m swap
MOVE PiP FREEZE
CHCTRL SCAN
If you press FREEZE before the
PiP window is displayed, the
current channel's video is frozen
in the PIP window, allowing you
to change channels on the main
picture while keeping the snap-
shot of the original channel in
the PIP window.
A typical use of SWAP is to scan
through channels in the PIP win-
dow, and when you find a channel
you like, press SWAP to display
that channel in the main picture,
sending the current channel to
the PIP window.
48