Back Panel - RCA F-35760 Owner's Manual

_ , _ • ,_ .... _;,_i _ _,,_
BACK PANEL
i II
_w _ _m_o m_m_o
-leee@
uMo_o _ vl_o
I
! . .
INPUT 1 Lets you connect a video component such as a VCR,
DSS receiver, or laserdisc player.
L/MONO Provides left audio connection. Or, if you are
connecting a mono component, use the L/MONO input.
The left audio •connector is usually white.
RIGHT Provides right audio connection. The right audio
connector is usually red.
VIDEO Provides video connection. The video connector is
usually yellow.
S-VIDEO Lets you connecta component with S-Video
capability, such as a DSS receiver or S-VIDEO VCR. When
using S-Video, make sure to connect the three audio/video
cables as well as the S-Video connector.
INPUT2 Provides connection to a second video component
such as a VCR or laserdisc player.
UMONO Provides left audio connection. Or, if you are
connecting a mono component, use the L/MONO input.
The left audio connector is usually white.
RIGHT Provides right audio connection. The right audio
connector is usually red.
VIDEO Provides video connection. The video connectoris
usually yellow.
SIGNAL SOURCE Provides connection to a home antenna or
cable TV system.
FIXED OUTPUT Provides fixed-level audio and video output
from the TV. These output signals are ideal for connecting to
an A/V receiver or amplifier that has its own remote control.
The FIXED OUTPUT jacks are also suitable or for recording
from the TV with a VCR, camcorder, or tape deck.
I
. , .o
The ANT B input can be used
for video games or home
computers, and you can switch
between the two inputs using
the ANTENNA button on the
remote.
If you are recording from INPUT
1 and you are using S-Video,
remember to connect the
regular INPUT 1 VIDEO cable as
well.
32 "