Table of Contents
Advertisement
Use the LCD Monitor or Viewfinder
for Playback
(continued)
To Play Back a Tape
1. Attach a power supply.
Attach the adapter/charger, charged
battery, or optional car cord.
2.
Insert a tape.
• Press STOP/EJECTto
open the
cassette
compartment.
• Insert the cassette with the safety
tab facing up and the tape windows
facing out.
• The camcorder
can only play back
tapes recorded
in the SP speed.
• Press the cassette
down gently until
it locks into place, and close the
cassette
compartment
door.
3. Press and hold the small red button
on the CAMERA/OFF/VCR
switch
while you set it to VCR.
4. Use the LCD monitor or viewfinder
to view what you are playing back.
Use the LCD Monitor
• Press the OPEN button to open the
LCD monitor.
Make sure the
monitor
is open at least 45 ° . The
viewfinder
automatically
turns off.
• You can rotate the monitor
around
when it is open 90 ° and place it
back against the camcorder.
• Fit the shoulder
extension
pad to
your shoulder
for convenient
viewing
using the LCD monitor.
• To adjust the brightness
of the
image in the monitor,
turn the
bright control.
.
.
• To adjust the speaker
volume, turn
the volume control.
Note: The monitor
may become
warm
when left open for an extended
period
of time.
This is normal.
Use the Viewfinder
• Make sure the monitor
is closed
and locked.
If the monitor
is open
more than 45 °, the viewfinder
automatically
turns off.
• Grasp the viewfinder
and rotate it
horizontally.
• Pull the viewfinder
out from the
camcorder
and rotate the eyepiece
to a comfortable
viewing position.
• Turn the eyepiece
focus control to
adjust the focus of the viewfinder
for your vision.
Note: You cannot hear the sound from
the internal speaker when using the
viewfinder for playback.
Press PLAY to begin playback.
• If necessary,
adjust tracking.
• During playback,
use the playback
features
on the following
pages.
Press STOP/EJECT
when you are
finished.
43
Advertisement
Table of Contents
