Table of Contents
Advertisement
Use the Adapter/Charger
to Power Your Camcorder
The adapter/charger
attaches to the camcorder
and lets you power your camcorder
directly
from standard
household
power.
The adapter/charger
operates
on 120 volts,
50/60 Hz, and can be used to power the camcorder
or recharge
the battery.
Attach Adapter/Charger
1. Attach
one end of the adapter/
charger's
DC cable to the DC
OUTPUTjack
on the adapter/charger.
2. Attach the other end of the cable to
the DC IN 9. 6V jack on the camcorder.
3. Plug the adapter/charger's
plug into an
operating
outlet.
The POWER
indicator
on the adapter/charger
lights
when it is properly
connected.
Notes: The adapter/charger cannot charge the
battery and operate the camcorder at the same
time. If you connect both, the adapter/charger
powers the camcorder. Remove the adapter/
charger's cable from the DC OUTPUT jack to
charge the battery.
When using the adapter/charger to power the
camcorder, the battery level indicator might
display _.
This indicator is used for
battery operation and has no meaning when
using the adapter/charger to power the
camcorder.
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
12
Advertisement
Table of Contents
