How To Set Up The Autotuning Feature - RCA D40W20BYX1 User Manual

Using the Features
How to Set Up the Autotuning Feature
The way you set up the automning Mature in _e "IV's menu corresponds to the component
butlons on the remote and the way you have each component connected to your "IV. When you
set up autotuning, you're telling the "IV what channel/input to tune to when you press the VCR,
DVD, SAT/CAB, AUX/HD or AUDIO button on the remote control.
1.
2.
3.
4.
5.
Press MENU (the MAIN MENU appears).
Highlight Setup and press OK on your remote con_ol.
Highlight Autotuni_ and press OK.
Choose which component button you would like to set:
Set VCR Channel Lets you set up the channel the "IV tunes to when you
press the VCR button.
Set DVD Channel Lets you set up the channel the "IV tunes to when you
press the DVD bulton.
Set SAT/CABLE Channel Lets you set up the channel the "IV tunes to when
you press tile SAT/CAB button.
SetAUX/HD Channel Lets you set up the channel the "IV tunes to when
you press the AUX/HD button.
Press the right arrow butlon to select the choice that matches the way you
have the component connected to Ibis "IV, and press OK.
You can select from the lk_llowing inputs or channels:
N/A Choose this if you don't have this particular component connected
to the TV, or if you don't want the "IV to automatically tune to the correct
channel/input when you're using this component.
Channel 3 or 4 Component is connected to tile CABLE/ANTENNA jack on
the back of the "IV, and you want the "IV to tune to channel 3 when you
press the corresponding button on the remote. Reminder: make sure the
component's Channel 3/4 switch is set to channel 3.
VID1 or V1D2 (Video Input) Component is connected to a VIDEO or
S-Video jack on the back of the "IV and you want the "IV to tune to a VID
input channel when you press the corresponding component button.
FRNT (Front Video Input) Component is connected to the VIDEO iack
on the front of the "IV and you want the TV to tune to the front VID input
channel (FliNT) when you press the corresponding component button.
CMP1 or CMP2 (Component Video Input) Compatible component video
source, such as a DVD player or digital "IV converter box, is connected to the
three COMPONENT VIDEO INPUT jacks (Y,PB,PR) on the back of the "IV and
you want the "IV to tune to the component video input channel (CMP) when
you press the corresponding component button.
DVI Component is connected to the DVI-HDCP iack on the back of the "IV
and you want lhe "IV to tune to the DVI input channel when you press the
corresponding component button.
Chapter 3
Graphics contained within this publication are fiar representation only.
25