Table of Contents
Advertisement
Connections
Setup
Changing
Lists and Labels
"II_e List & Labels part of _e setup lets you edit your channel list and choose or
create a personal
six-character
label for each channel.
Note: Changing List and Labels can be time consuming. You can change
these at a later time by accessing the Setup menu.
1.
Press the left or right arrow to scroll fllrough tlle channels
and choose the
one you want to edit.
2.
Press the down arrow {o highlight the In channel
list option. Press the let)
or right arrow button to add (the box is checked)
or remove (tim box is
unchecked)
the channel from llle list.
.
Press the down arrow to highlight the Channel
label option. Press the left
or right arrow button to scroll through the available list of 25 most common
labels. The last option in the list allows you to create your own sLx-
character label for the channel (the first letter of the label is highlighted).
4.
Press the 1 or 2 nmnber button to change the first letter of llle label.
.
6.
Press the fight arrow to highlight the second lette_; then press the 1 or 2
nmnber
button to change the second lettei; etc...
When you are finished creating your label, press OK. For models D34W20
and D34W20B, press CLEAR to tune to the last selecled/available
channel
in your channel list. For models D40W20, D40W20B, D52W20, D52W20B,
D56W20, D56W20B, D61W20 and D61W20B, select Go back to go to the
Auto Convergence
menu.
Note:
If you're
using an HD source (such as an
HDTV tuner or HDTV satellite
receiver) on the
CMPNT or DVI input, you should
run Auto
convergence
separately
for that input as well.
Tune to the input you're
using for the HD
source, then go to page 38 for information
on Auto convergence.
Auto
Convergence
(for models D40W20, D40W20B, D52W20, D52W20B,
D56W20,
D56W20B,
D61W20
and D61W20B
only)
Your TV's picture tubes might have been disturbed
during delivery or alter you
moved the "IV, causing the color in your "1_ to be out of alignment.
The colors
adjust by starting auto convergence.
IMPORTANE" Auto convergence
works best once the TV has warmed
up
for at least an hou_ If you've just unpacked your TV, it's a good idea to
repeat the Auto convergence
function
when the TV's been running
for at
least an hour See page 38 for more information
about Auto convergence.
1.
Press OK to begin auto convergence.
2.
When the auto convergence
is complete,
the Red center convergence
menu
appem:s. The cross in the middle of the screen should be yellow. If it is not,
use the arrow buttons to move the red cross to overlap tl_e green cross.
Press OK when adjusunents
are complete.
.
"I]_e Blue center convergence
menu appears
will1 a cyan cross in the middle
of {he screen. If it is not, use the arrow buttons
to move Ihe blue cross
to overlap the green cross. Press OK (tim TV tunes to the last selected/
available channel in llle channel list).
Chapter
_
Graphics contained
within this publication
are fiar representation
only.
17
Advertisement
Table of Contents
