Table of Contents
Advertisement
Chapter
1
Connections
&
Setup
2.
If you have a cable box connected
to this IV/DVD,
highlight
Yes and press OK on your remote control.
Note: Thenext seriesof screensis very important becausethe
GUIDEPlus+ system must find the correctcable box information in
order to receivethe correct PVprogramlisting£
If yOU don't have a cable box connected
to this IV/DVD,
highlight
No and press OK (STEP3: Configuring
for a VCR
appears).
3.
Highlight
the channel to which you have to tune your IV
in order to see cable programming,
and press OK (a
screen appears reminding you to connect your G-LINK
cable to your IV/DVD and cable box).
Notes: Channel 03 is the most common.
ChooseVideo1/AUXif your cablebox is connected to your IV/DVD
with audio/video cablesinstead of a coaxial cable.Go to page 4 for
pictures of these cables.
4.
Highlight
your brand of cable box, and press OK.
If your brand isn't listed, highlight
Not Listed and press
OK.
5.
Make sure your cable box is on.
Tune the cable box to channel 02 (use the remote control
that came with your cable box, or press the channel
buttons on the cable box).
Press OK (the GUIDE Plus+ system starts testing codes).
Important Note: When code testing is in progress,don't touch your
TV/DVD, V CR, c able box or any of the remote controls for these
products.
1.2
Graphics contained
within this publication
are for representation
only.
Chapter
I
Advertisement
Table of Contents
Troubleshooting
