Table of Contents
Advertisement
information
Disp|ays
Chapter
6
Using IntroScan (Available only
on Audio
CDs and
MP3s)
IntroScan plays the first ten seconds of each track on the CD (similar to the scan feature that's on many
car radios]. To use IntroScan:
1. Press INFO on the remote (the Info Display appears).
2.
Highlight
the IntraScan icon. Press OK. The first ten seconds of each track will play.
•
After IntroSean goes through all of the tracks, it stops.
•
If you want to stop IntroSean while it's in progress, press PLAY on the remote. The current track
starts playing in its entirety.
•
You can also access IntroScan from the Play Made menu in the DVD's main menu.
Using Bookmarks
(Available
only on Audio CDs)
To store, use and dear bookmarks,go to page 22. The instructions are the same.
Dub
Assist
(Available only
on Audio
CDs)
Dub Assist helps you record a CD onto an audio cassette tape by determining
the number of tracks that
will fit on one side of the tape so you have time to turn the tape over to record on the other side. Dub
Assist does not have an icon on the Info Display bar. It is activated
through the DVD's Play menu.
To use Dub Assist when you're recording a CD onto an audio cassette:
1. Press STOP if a CD is playing (the DVD's main menu appears).
2.
Highlight
Play Mode and press OK (the Play Mode options appear).
3.
Highlight
Dub Assistand
press OK (the Dub Assistsereen
appears).
4. The highlight
should be in the Play Order window. Choose Standard, Optimized,
or Program.
Standard:
This is the default
mode. The tracks are recorded in
the order on the CD (track 1 is recorded first, track 2 second,
etc.)
Optimized:
The tracks are recorded
in the order that
optimizes
the number
of tracks that can fit on one side of
the audio cassette so you have the least amount
of dead
space at the end of the tape.
Usethe Dub Assist screen to determine
how many CD tracks can fit on a cassette.
Program:
The tracks are recorded
in the order you program.
You must create
your program
in the Edit Program
menu
that's
in the DVD's Playmenu.
5. Usethe arrow keysto highlight the Segment Length box.
When the Segment Length box is highlighted, use the
up/down arrow buttons to enter the length of one side
of the audio cassette.
6.
The order the tracks will be recorded
in appears
in the
Segment Length box. Use the arrow keys to highlight
the
Start box and press OK.
7.
Follow the instructions
on the screen to begin recording.
Chapter
6
Graphics contained within this publication are for representation onl)z
53
Advertisement
Table of Contents
Troubleshooting
