Complete Auto Channel Search - GE 13V110TD User Manual

Connections & Setup Chapter 1
Complete Auto Channel Search
The next part of the 5ETUPasks you if you want the IV to
search for all channels viewable through your antenna or
cable W system. This is sometimes called "auto
programming."
1. Press OK to tell the IV to begin searching for channels. A
progress report appears on the screen.
2. When the screen on the IV tells you the search is
complete, press OK (the first GUIDE Plus+ system setup
screen appears).
Note: IfyouskipAutoChannd Seemh now,youcanoccess i t loter
throughtheChonnel menuSee Chepter 5 formoredeteil¢.
The GUIDE Plus+ System Setup
The GUIDE Plus+ system is an on-screen interactive program guide that lists what shows are on IV in
your area. In order to receive program listings, you need to complete the following steps.
The G-LINK cable must be connected to the back of your IV/DVD, and the wands must be placed in front
of the remote sensor of the cable box and/or VCR in order for the GUIDE Plus+ system to work (go back
to page 9 for details).
1. You should see a screen displaying the features of the Guide Plus+ system. Press OK to continue.
2. The next screen asks you to locate setup materials and hardware. Once you have done this, press OK
to continue.
Step 1: Identifying Your TV's Location
1. If your country is highlighted, press OK on the remote
control.
If your country isn't highlighted, press the up or down
arrow button on the remote control to highlight your
country and press OK.
2. Use the number buttons on your remote to enter your zip
code.
Press OK when you're finished.
Note: If your postcfl codecon toins letters, pressthe up and down
errow buttons on your remote to enter letters, and press the right
affow button to go to the next¸spoce.The/eft arrow burton moves
you to the left.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup. To
supply your IV with the correct IV program listings, the
GUIDE Plus+ system needs to know if your IV/DVD is
connected to cable.
1. If your IV/DVD is connected to cable, highlight Yes and
press OK.
If your IV/DVD isn't connected to cable, highlight No and
press OK (STEP3: Configuring fore VCR appears).
Chapter I Graphics contained within this publication are for representation only 11