How To Find The Remote Sensor; Placing The G-Link Wands - GE 13V110TD User Manual

Connections & Setup Chapter 1
How to Find the Remote Sensor
You have to Naee the G-UNK wands in front of the remote sensor on the VCRand/or cane box. Some
cane boxes and VCRshave the remote sensor labeled on the unit. If the remote sensor isn't labeled on
your VCRand/or cable box, you need to usethe remote control that came with the VCRand/or cane box
to locate the sensor.
1. Turn off the VCRand!or cable box.
2. Hold the remote control (not the one that came with your lV/DVD, but the one that came with the
cable box and!or VCR to which you're attaching the G-LINK cable) so that it is touching the front of
the component.
3. Slowly move the remote control across the front of the component (VCR or cable box) while you
press the power button on and off. You must press and release the power button each time you
move the remote (holding down the button won't work).
II II
4. When the component turns on, you've located the remote sensor.
Placing the G-LINK Wands
Place the G-LINK wands in front of the remote sensor on your VCR and/or cable box approximately one
inch away from the remote sensor (see instructions below).
IV/aV9
oC n ° ntheeC; _c°G; _1_11 K JaT_kvD"
II k I ..... -I
Chapter I Graphics contoined within this publicotion are for representotion onlg 9