Table of Contents
Advertisement
Chapter
1
Connections
&
Setup
Put Batteries
in the
Remote
1. Remove the battery compartment
cover on the remote.
2.
Insert new batteries. Match the polarities (+ and -) on the batteries with the diagram on the remote.
3.
Put the battery compartment
cover back on the remote.
Plug in the TV/DVD
Plug the end of the power cord into the wall outlet. Match the wide blade of the plug with the wide slot
in the outlet. Insert the plug completely
into the outlet.
Use the arrow buttons and
the OK button to move
through the menu system.
How to Use the
Remote
Control
to Complete
the
Interactive
Setup
The technical
term is "Navigation"
- how you move through the on-
screen menus. The theory is the same throughout
the menu screens:
highlight your choice and select it.
To highlight
a menu item, press the arrow buttons on the remote to
highlight
one of the items listed on the screen. Use the up or down
arrow button to move up or down. Use the right or left arrow button
to
move right or left.
To select the item that you've highlighted,
press OK.
Note: Highlighted means thor the menu item stondsout from other menu items
on the list (appearsdarker,bNghter,or a different color).
Turn on the TV
Press the lV button
on the remote control or the POWER button on the 1V/DVD's front panel (the first
screen of the Interactive
Setup appears). The menu screens "time out" after a period of time if you don't
make a selection. The tips in this section tell you how to access the Setup menu screens manually.
Note: Pressingthe ?Vbutton not only turns on the TV, b ut puts the remote into TVmode. "TV mode" means that the
buttons on the remote control operate the TV'sfunctions.
Complete
the
Interactive
Setup
The menu system in your lV allows the 1V's features to work properly. In this book, we call it the
"interactive
setup" because the 1V asks you questions, you answer, and the 1M makes the appropriate
adjustments. The first time your 1M/DVD is in 1V mode, the setup screens appear.
Set the
Menu
Language
The first part of the SETUPasks you to select your preferred
language for the menu system.
1. Highlight
your preferred language for the menu system.
2.
Press OK to select that language.
10
Graphics contained within this publication are for representation only.
Chapter
1
Advertisement
Table of Contents
Troubleshooting
