Tv/Dvd + Receiver - GE 13V110TD User Manual

Chapter 1 Connections & Setup
TV/DVD + Receiver
1. Connect the I_//DVD to your cable or antenna
Connect the coaxial cable from your cable or antenna to the ANTENNAjack on the back of your
]V/DVD.
2A.Connect the AN receiver to your W/DVD
Connect the audio/video cables.Connect audio cables (white and red) to the AUDIOOUTjacks on the
back of the ]V/DVD (R and L) and to the Audio Input Jackson the receiver (sometimeslabeled AUDIO
IN L R).
or
2B. Connect Dolby Digital or the DTS Receiverto your TVlDVD
If you have a Dolby Digital or DTSreceiver with a Digital Input jack, connect an optical cable (not
provided) to the DIGITAL AUDIO OUTjack on the _V/DVDand to the Digital Input jack on the back of
the receiver.You must also set the Digital Output setting in the Sound menu (Chapter 4 has details).
3. If you're connecting a cable box, connect the G-LINK cable
Connect the G-LINK cable to the G-LINK jack on the W/DVD. Next step, place the wands of the
G-LINK cable to the cable box (instructions are on page 9).
GO to page 9
Why You Should Connect This G-LINK Cable
The G-LINK cable enables the GUIDE Plus+ system (the on-screen interactive program guide) to work
with your VCR
andlor
cable box.
Cable Box - If your ]V/DVD is connected to a cable box you must connect the G-LINK cable to receive
TV program listings for your area, and to tune directly to a channel when the program guide is on your
TV screen.
VCR - If your 1V/DVD is connected to a VCRand you don't connect the G-LINK cable, one-touch VCR
recording won't work. The other features of the guide will work properly.
8 Graphics contained within this publication are for representation only. Chapter 1