How To Use The Elliptical Exerciser - ProForm 790 E User Manual

HOW TO USE THE ELLiPTiCAL EXERCISER
HOW TO PLUG IN THE POWER CORD
This product must be grounded, if it should mal-
function or break down, grounding provides a path of
least resistance for electric current to reduce the risk
of electric shock, This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug.
Plug the power cord into an appropriate outlet that
is properly installed and grounded in accordance
with all local codes and ordinances. This product
is for use on a nominal 120-volt circuit. IMPOR-
TANT: The elliptical exerciser is not compatible
with GFCI-equipped outlets.
A temporary
adapter may Outlet Box
be used to
connect the
power cord to
a 2-pole
receptacle as
shown at the
right if a prop- Lug
erly grounded Metal Screw
outlet is not
available. The
temporary adapter should be used only until a prop-
erly grounded outlet can be installed by a qualified
electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in
place by a metal screw. Some 2-pole receptacle out-
let box covers are not grounded. Contact a
qualified electrician to determine if the outlet box
cover is grounded before using an adapter.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Due to the size and weight of the elliptical
exerciser, moving it requires two persons. Stand in
front of the elliptical exerciser, hold the upright, and
place one foot against one of the front wheels. Pull on
the upright and have a second person lift the handle
at the rear until the elliptical exerciser will roll on the
front wheels. Carefully move the elliptical exerciser to
the desired location, and then lower it to the floor.
Pull on the
upright
Place
your foot
here
Lift here
13