Table of Contents
Advertisement
ASSEMBLY
Assembly
requires two persons.
Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly
is completed.
Note: The underside of the treadmill walking
belt is coated with high-performance
lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires
the included he_
and your own Phillips screwdriver
_,
adjustable
wrench _,
and scissors
_.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware
kit, check to see if it is preattached
to one of the parts to be assembled.
To avoid damaging
plastic parts, do not use power tools for assem-
bly. Extra hardware
may be included. If a part is missing,
call 1-888-533-1333.
M8 Star
Washer (9)-4
Base Foot Spacer
(94)-2
M10 Star
Washer (8)-4
3/8" Jam Nut
(5)-1
#8 x 1/2" Ground
Screw (29)-1
M8 x 25mm
Bolt (4)-4
M4.2 x 19mm
Screw (1)-8
M4.2 x 25mm Tek
Screw (2)-4
3/8" x 1 3/4" Bolt (6)-2
Bolt Spacer (98)-4
M10 x 96mm Bolt (7)-4
Hide quick links:
Advertisement
Table of Contents
